Lotus E21

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Lotus E21
Kimi Raikkonen 2013 Malaysia FP1.jpg
Category Formula One
Constructor Lotus
Designer(s) James Allison (Technical Director)[1]
Predecessor Lotus E20
Successor Lotus E22
Technical specifications[2][3]
Chassis Moulded carbon fibre and aluminium honeycomb composite monocoque, manufactured by Lotus F1 Team and designed for maximum strength with minimum weight. Installing the engine as a fully stressed member.
Suspension (front) Carbon fibre top and bottom wishbones operate an inboard rocker via a pushrod system. This is connected to a torsion bar and damper units which are mounted inside the front of the monocoque.
Suspension (rear) Carbon fibre top and bottom wishbones with pull rod operated torsion springs and transverse-mounted damper units mounted in the top of the gearbox casing.
Engine Renault RS27-2013 2.4 L (146 cu in) V8 (90°). Naturally aspirated, 18,000 RPM limited with KERS, mid-mounted.
Transmission Lotus Seven-speed semi-automatic titanium gearbox with reverse gear.
Weight 642 kg (1,415.4 lb), with driver, cameras and ballast
Fuel Total[4]
Kevlar-reinforced rubber fuel cell by ATL.
Tyres Pirelli P Zero (dry), Cinturato (wet)[5]
OZ Wheels (front and rear): 13"[4]
Competition history
Notable entrants Lotus F1 Team
Notable drivers 7. Finland Kimi Räikkönen[6]
7. Finland Heikki Kovalainen
8. France Romain Grosjean[7]
Debut 2013 Australian Grand Prix
Races Wins Podiums Poles F.Laps
19 1 14 0 2

The Lotus E21[8] is a Formula One racing car designed and built by the Lotus F1 team for use in the 2013 championship.[1] The car was driven by 2007 World Champion Kimi Räikkönen and Romain Grosjean,[6][7] both of whom remained with the team after competing in 2012. The E21 was the first of the 2013 season cars to be launched.[9]

Design

Despite the perpetual troubles the team experienced with the "passive Drag Reduction System" device on the E20 chassis, which spent most of the 2012 season in development without ever being raced,[10][11][12] the E21 was launched with a passive DRS device of its own.[13]

Following criticism of the cars raced in 2012 for being "ugly" because of a visible step in the design of the nose,[14] the 2013 technical regulations allowed teams to use a "modesty panel", or a small piece of carbon fibre designed to cover the nose of the car for aesthetic purposes.[15] However, the E21 was launched without a modesty panel, as the team felt that it offered no aerodynamic benefit, and that the aesthetic qualities it offered were not worth the added weight, however slight the weight gain might be.[16]

Complete Formula One results

(key) (results in bold indicate pole position; results in italics indicate fastest lap)

Year Entrant Engine Tyres Drivers Grands Prix Points WCC
AUS MAL CHN BHR ESP MON CAN GBR GER HUN BEL ITA SIN KOR JPN IND ABU USA BRA
2013 Lotus F1 Team Renault RS27-2013 P Kimi Räikkönen 1 7 2 2 2 10 9 5 2 2 Ret 11 3 2 5 7 Ret 315 4th
Heikki Kovalainen 14 14
Romain Grosjean 10 6 9 3 Ret Ret 13 19† 3 6 8 8 Ret 3 3 3 4 2 Ret

Driver failed to finish the race, but was classified as they had completed greater than 90% of the race distance.

References

  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. http://www.lotusf1team.com/-Chassis-E20-.html
  3. http://www.f1technical.net/f1db/cars/1000/lotus-e21
  4. 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. 6.0 6.1 Lua error in package.lua at line 80: module 'strict' not found.
  7. 7.0 7.1 Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.

External links