Obturator ring

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Lua error in package.lua at line 80: module 'strict' not found.

Obtuator ring used in Bleriot aircraft

Obturator rings are a specific type of piston ring used in World War I aero engines to compensate for warping of the cylinders.

Purpose

The rotary aircraft engines of World War I (engines with the crankshaft fixed to the airframe and rotating cylinders) were notoriously difficult to keep cool when operating. Thus, their very thin walled steel cylinders would become distorted to an unacceptable level. Obturator rings, made of brass, were fitted to compensate for this out-of-roundness in much the same way as a leather washer does in a bicycle pump. Wear on the rings was considerable and they only lasted a matter of hours. By the time the war ended, technology and materials had advanced sufficiently to do away with these obturator rings.

See also


<templatestyles src="Asbox/styles.css"></templatestyles>