SS Orsova (1953)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

SS Orsova
300px
History
Namesake: Orșova
Owner:
Operator: 1954-1960, Orient Line. 1960-1966, P&O-Orient Lines. 1966-1974, P&O Line
Port of registry: London,  UK
Route: (Typically) Tilbury-Naples-Port Said-Aden-Colombo-Fremantle-Melbourne-Sydney (from 1955, occasional return Sydney-US West Coast-Panama-Tilbury)
Builder: Vickers Armstrongs (Shipbuilders) Ltd, Barrow in Furness, England
Cost: £6,500,000
Yard number: 1021
Launched: 14 May 1953
Sponsored by: Lady Anderson
Completed: March 1954
Maiden voyage: 17 March 1954
Out of service: 1973
Identification:
Fate: Scrapped 1974
General characteristics
Type: Ocean liner
Tonnage:
  • As built 28,790 GRT (1969, 29,091 GRT)
  • 15,878 NT
  • 11,940 DWT
Length: 220.24 m (722.6 ft)
Beam: 27.60 m (90.6 ft)
Draft: 9.433 m (30.95 ft)
Depth: 12.19 m (40.0 ft)
Installed power: 42,500shp
Propulsion: reduction-geared turbine, twin screws
Speed:
  • 22 knots (41 km/h; 25 mph) (service)
  • 26 knots (48 km/h; 30 mph) (max. trials)
Capacity: 681 1st class, 813 tourist class
Crew: 620

SS Orsova, was a British ocean liner, built by Vickers Armstrong Shipbuilders Ltd. of Barrow-in-Furness, England for the Orient Steam Navigation Company (Orient Line) for their Great Britain-to-Australia services via the Suez Canal. She was the final development of the 28,000 ton class which began with the SS Orcades of 1948 and continued with the SS Oronsay of 1951. In 1960, in conjuction with the introduction of the new larger and faster Oriana and Canberra, the fleets of Orient (which was majority owned by P&O) and P&O were combined as P&O-Orient Lines, although the Orient ships retained their corn coloured hulls and sailed under their own house flag. In 1966, P&O acquired the balance of the Orient shares and the Orient Line was discontinued, with Orsova and her fleet mates being transferred to the ownership of the Peninsular and Oriental Steam Navigation Company (P&O), painted white and under the P&O houseflag.

Description

She had a gross register tonnage of 28,790 GRT and a 30-foot (9.1 m) draft. Length: 220 metres (720 ft). Breadth: 28 metres (92 ft). Cruising speed: 22 knots (41 km/h; 25 mph). Maximum speed: 26 knots (48 km/h; 30 mph). Propulsion: twin screw, double reduction turbine. Maiden voyage from Tilbury to Sydney: 17 March 1954. Orsova had no masts. Her funnel was capped with a distinctive 'Welsh bonnet' flue extension. She was built with an all-welded hull, the first passenger liner to be so constructed,[1] and her bulkhead and wall linings were plastic-clad.

She was named after Orșova, which is a port city on the Danube in southwestern Romania's Mehedinți County. It is situated just above the Iron Gates, at the point where the Cerna River meets the Danube. Orsova's bow featured the Iron Gates as a figurehead. This section of the bow opened inwards to reveal a powerful searchlight, used for navigating the Suez Canal. The Iron Gate symbol also featured on the forward bulkhead of the First Class Midships Arena Games deck.

Orsova had First and Tourist Class sections with separate dining rooms either side of the Galley.

Radio Call Sign: GNDL (Golf November Delta Lima) with sub-contracted Marconi radio operators.

Ship's Complement: All Officers were British. Deck and Engine Room crew were British. Purser's Dept (Cabin Stewards, Restaurant staff, Galley, Laundry, etc.) were a combination of British and Goanese.

Typical Voyage (1968): Outward leg - Southampton-Bermuda-Port Everglades-Panama-Acapulco- Los Angeles-San Francisco-Vancouver-Hawaii-Fiji-Auckland-Sydney Then either cruising from Sydney for six weeks or Round Pacific Sydney-Singapore-Hong Kong-Kobe-Yokohama-Hawaii-Vancouver-San Francisco-Los Angeles-Hawaii-Fiji-Auckland-Sydney Home leg - Sydney-Brisbane-Singapore-Penang-Colombo (with Goan crew change) Durban-Port Elizabeth-Cape Town-Madeira-Southampton.

History

On 24 May 1956, Orsova ran aground off Port Phillip Bay, Melbourne, for twelve hours. In the 1960s, Orsova carried many thousands of emigrants from Greece and Italy to Australia.

Orsova was transferred to sister company P&O in 1966.

In 1966, the Gulf Oil Corporation identified Whiddy Island in Bantry Bay, Ireland, as the most suitable site for its new oil terminal. Construction started in 1967 and the terminal was completed in 1969. Orsova was chartered by Gulf Oil in the spring of 1969 to act as a floating hospitality and accommodation ship for the formal opening of the Bantry Bay Oil Terminal. Leaving Southampton she called at Cobh in Ireland to collect the many guests to be taken to the Bay for the ceremony. These included the then Taoiseach, Jack Lynch, together with many ambassadors to the Republic. They were then returned to Cobh and Orsova returned to Southampton for spring cruising.

In the early 1970s, she was primarily involved in cruises. In 1973 P&O announced that their flagship, Canberra, was to be withdrawn from service, largely because her deep draught prevented her from berthing at many popular cruise ports. Orsova was to be rebuilt as a cruise ship and sail in tandem with Oriana. Many P&O directors were appalled that their flagship might be scrapped (P&O never sold ships for further service) and that the fleet would consist of ex Orient ships. After a boardroom battle, the decision was reversed and Orsova was instead withdrawn from service at the end of 1973. She was sold to shipbreakers in Taiwan and arrived at Kaohsiung on February 14, 1974 to be broken up.[2]

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Kludas, Great Passenger Ships of the World Vol.5
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

External links

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.