Conformational isomerism

From Infogalactic: the planetary knowledge core
(Redirected from Conformation (chemistry))
Jump to: navigation, search
Rotation about single bond of butane to interconvert one conformer to another. Above: Newman projection; below: depiction of spatial orientation.

In chemistry, conformational isomerism is a form of stereoisomerism in which the isomers can be interconverted exclusively by rotations about formally single bonds (refer to figure on single bond rotation).[1] Such isomers are generally referred to as conformational isomers or conformers and, specifically, as rotamers.[2] Rotations about single bonds are restricted by a rotational energy barrier which must be overcome to interconvert one conformer to another. Conformational isomerism arises when the rotation about a single bond is relatively unhindered. That is, the energy barrier must be small enough for the interconversion to occur.

Conformational isomers are thus distinct from the other classes of stereoisomers (i. e. configurational isomers) where interconversion necessarily involves breaking and reforming of chemical bonds.[3] For example, L- & D- and R- & S- configurations of organic molecules have different handedness and optical activities, and can only be interconverted by breaking one or more bonds connected to the chiral atom and reforming a similar bond in a different direction or spatial orientation.

The study of the energetics between different rotamers is referred to as conformational analysis.[4] It is useful for understanding the stability of different isomers, for example, by taking into account the spatial orientation and through-space interactions of substituents. In addition, conformational analysis can be used to predict and explain product(s) selectivity, mechanisms, and rates of reactions.[5]

Types of conformational isomerism

Free energy diagram of butane as a function of dihedral angle.

The types of conformational isomers are related to the spatial orientations of the substituents between two vicinal atoms. These are eclipsed and staggered. The staggered conformation includes the gauche (±60°) and anti (180°) conformations, depending on the spatial orientations of the two substituents.

For example, butane has three rotamers relating to its two methyl (CH3) groups: two gauche conformers, which have the methyls ±60° apart and are enantiomeric, and an anti conformer, where the four carbon centres are coplanar and the substituents are 180° apart (refer to free energy diagram of butane). The energy difference between gauche and anti is 0.9 kcal/mol associated with the strain energy of the gauche conformer.[4] The anti conformer is, therefore, the most stable (~ 0 kcal/mol). The three eclipsed conformations with dihedral angles of 0°, 120°, and 240° are not considered to be rotamers, but are instead transition states of higher energy.[4] Note that the two eclipsed conformations have different energies: at 0° the two methyl groups are eclipsed, resulting in higher energy (~ 5 kcal/mol) than at 120°, where the methyl groups are eclipsed with hydrogens (~ 3.5 kcal/mol).[6]

While simple molecules can be described by these types of conformations, more complex molecules require the use of the Klyne–Prelog system to describe the different conformers.[4]

More specific examples of conformational isomerism are detailed elsewhere:

  1. Ring conformation
  2. Allylic strain – energetics related to rotation about the single bond between sp2 and sp3 carbons.
  3. Atropisomerism – due to restricted rotation about a bond, a molecule can become chiral.
  4. Folding of molecules, where some shapes are stable and functional, but others are not.

Free energy and equilibria of conformational isomers

Equilibrium of conformers

Equilibrium distribution of two conformers at different temperatures given the free energy of their interconversion.

Conformational isomers exist in a dynamic equilibrium, where the relative free energies of isomers determines the population of each isomer and the energy barrier of rotation determines the rate of interconversion between isomers:[7]

 K = {e^{-\Delta G/RT}}

where K is the equilibrium constant, \Delta G is the difference in free energy between the two conformers in kcal/mol, R is the universal gas constant (0.002 kcal/mol K), and T is the system's temperature in Kelvin (K).

Three isotherms are given in the diagram depicting the equilibrium distribution of two conformers at different temperatures. At a free energy difference of 0 kcal/mol, this gives an equilibrium constant of 1, meaning that two conformers exist in a 1:1 ratio. The two have equal free energy; neither is more stable, so neither predominates compared to the other. A negative difference in free energy means that a conformer interconverts to a thermodynamically more stable conformation, thus the equilibrium constant will always be greater than 1. For example, the ΔG of butane from gauche to anti is −0.9 kcal/mol, therefore the equilibrium constant is 4.5, favoring the anti conformation. Conversely, a positive difference in free energy means the conformer already is the more stable one, so the interconversion is an unfavorable equilibrium (K is less than one). Even for highly unfavorable changes (large positive ΔG), the equilibrium constant between two conformers can be increased by increasing temperature, meaning the amount of the less stable conformer present at equilibrium does increase slightly.

Population distribution of conformers

Boltzmann distribution % of lowest energy conformation in a two component equilibrating system at various temperatures (degrees Celsius, color) and energy difference in kcal/mol (x-axis)

The fractional population distribution of different conformers follows a Boltzmann distribution:[8]

 \frac{N_i}{N_\text{total}} 
= 
\frac 
  {e^{-E_\text{rel}/RT}}
  {\sum_{k=1}^{N_\text{total}} e^{-E_k/RT} }

The left hand side is the equilibrium ratio of conformer i to the total. Erel is the relative energy of the i-th conformer from the minimum energy conformer. Ek is the relative energy of the k-th conformer from the minimum energy conformer. R is the molar ideal gas constant equal to 8.31 J/(mol·K) and T is the temperature in kelvins (K). The denominator of the right side is the partition function.

Factors contributing to the free energy of conformers

The effects of electrostatic and steric interactions of the substituents as well as orbital interactions such as hyperconjugation are responsible for the relative stability of conformers and their transition states. The contributions of these factors vary depending on the nature of the substituents and may either contribute positively or negatively to the energy barrier. Computational studies of small molecules such as ethane suggest that electrostatic effects make the greatest contribution to the energy barrier; however, the barrier is traditionally attributed primarily to steric interactions.[9][10]

Contributions to rotational energy barrier

In the case of cyclic systems, the steric effect and contribution to the free energy can be approximated by A values, which measure the energy difference when a substituent is in the axial or equatorial position.

Isolation or observation of the conformational isomers

The short timescale of interconversion precludes the separation of conformational isomers in many cases. Atropisomers are conformational isomers which can be separated due to restricted rotation.[11]

Protein folding also generates stable conformational isomers which can be observed. The Karplus equation relates the dihedral angle of vicinal protons to their J-coupling constants as measured by NMR. The equation aids in the elucidation of protein folding as well as the conformations of other rigid aliphatic molecules.[12]

The equilibrium between conformational isomers may also be observed using spectroscopic techniques:

In cyclohexane derivatives, the two chair conformers interconvert with rates on the order of 105 ring-flips/sec,[clarification needed] which precludes their separation.[13][dubious ] The conformer in which the substituent is equatorial crystallizes selectively, and when these crystals are dissolved at very low temperatures, one can directly monitor the approach to equilibrium by NMR spectroscopy.[14]

The dynamics of conformational (and other kinds of) isomerism can be monitored by NMR spectroscopy at varying temperatures. The technique applies to barriers of 8–14 kcal/mol, and species exhibiting such dynamics are often called "fluxional".

IR spectroscopy is ordinarily used to measure conformer ratios. For the axial and equatorial conformer of bromocyclohexane, νCBr differs by almost 50 cm−1.[13]

Conformation-dependent reactions

Reaction rates are highly dependent on the conformation of the reactants. This theme is especially well elucidated in organic chemistry. One example is provided by the elimination reactions, which involve the simultaneous removal of a proton and a leaving group from vicinal positions under the influence of a base.

Base-induced bimolecular dehydrohalogenation (an E2 type reaction mechanism). The optimum geometry for the transition state requires the breaking bonds to be antiperiplanar, as they are in the appropriate staggered conformation

The mechanism requires that the departing atoms or groups follow antiparallel trajectories. For open chain substrates this geometric prerequisite is met by at least one of the three staggered conformers. For some cyclic substrates such as cyclohexane, however, an antiparallel arrangement may not be attainable depending on the substituents which might set a conformational lock.[15] Adjacent substituents on a cyclohexane ring can achieve antiperiplanarity only when they occupy trans diaxial positions.

One consequence of this analysis is that trans-4-tert-butylcyclohexyl chloride cannot easily eliminate but instead undergoes substitution (see diagram below) because the most stable conformation has the bulky tBu group in the equatorial position, therefore the chloride group is not antiperiplanar with any vicinal hydrogen. The thermodynamically unfavored conformation has the tBu group in the axial position, which exhibits the high energetic 7-atoms interactions (see A value) of 4.7–4.9 kcal/mol.[16] As a result, the tBu group "locks" the ring in the conformation where it is in the equatorial position and substitution reaction is observed. On the other hand, cis-4-tert-butylcyclohexyl chloride undergoes elimination because antiperiplanarity of Cl and H can be achieved when the tBu group is in the favorable equatorial position.

Thermodynamically unfavored conformation of trans-4-tert-butylcyclohexyl chloride where the tBu group is in the axial position exerting 7-atoms interactions.
The trans isomer can attain antiperiplanarity only via the unfavored axial conformer; therefore, it does not eliminate.The cis isomer is already in the correct geometry in its most stable conformation; therefore, it eliminates easily.


See also

References

  1. IUPAC definition of a conformer.
  2. IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version:  (1996) "Rotamer".
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 4.2 4.3 Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. 13.0 13.1 Eliel, E. L.; Wilen, S. H.; Mander, L. N. "Stereochemistry Of Organic Compounds", J. Wiley and Sons, 1994. ISBN 0-471-01670-5.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.