Contact print

From Infogalactic: the planetary knowledge core
(Redirected from Contact printing)
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

An example of a contact print from small format film strips intended for image review.

A contact print is a photographic image produced from film; sometimes from a film negative, and sometimes from a film positive. The defining characteristic of a contact print is that the photographic result is made by exposing through the film negative or positive, onto a light sensitive material that is pressed tightly to the film.

In the dark, or under a safe light, an exposed and developed piece of photographic film is placed emulsion side down, against a piece of photographic paper. Light is briefly shone through the negative. Then, the paper is developed into a contact print. The image in the emulsion has been pressed as close as possible to the photosensitive paper. An exposure box device called a contact printer or a printing frame is sometimes used within a light-controlled space called a darkroom. Enlargers can also be used for this process.[1]

Basic tools

One or more negatives are placed in intimate contact with a sheet of sensitized photographic paper. The negative and the photographic paper are then placed, negative side down, onto the top transparent glass plate of the exposure box. Within the box and below the top plate is a translucent light diffuser made from frosted glass. Below the diffuser is a switch-controlled electric light source. A hinged top-cover keeps the materials in close contact and reduces or eliminates the amount of stray light allowed into the darkroom. Ansel Adams describes procedures for making contact prints using ordinary lighting in his book, The Print.

The contact printer is used to expose the negative's image onto the paper for a few seconds, creating an invisible latent image on the paper. The operator may use a manual switch and count off the seconds himself, or he may use an electric timer switch.

The black and white gelatin-silver process may be done using a red "safe light" for darkroom illumination. The contact printer may also contain a safe light so that the negative can be examined before the photographic paper is laid upon it.

After exposure, the paper is processed using chemicals in the darkroom to produce the final print. The paper must be placed in a film developer bath, a stop bath, fixer, and finally the hypo-eliminator bath, in that order. Failure to adhere precisely to this process will result in a poor-quality final image with a variety of issues.[2]

Proof sheets

A 120 roll film proof sheet of Diane Arbus' containing her Child with Toy Hand Grenade in Central Park from 1962

Since this process produces neither enlargements nor reductions, the image on the print is exactly the same size as the image on the negative. Contact prints are used to produce proof sheets from entire rolls of 35 mm negative (from 135 film cassettes) and 120 (2​14 film rolls) in order to aid in the selection of images for further enlargement, and for cataloging and identification purposes. For 120 roll film (once a common negative size for popular cameras) and larger film, contact prints are often used to determine the final print size. In medium and large format photography, contact prints are prized for their extreme fidelity to the negative, with exquisite detail that can be seen with the use of a magnifying glass. A disadvantage to using contact prints in the fine-arts is the laboriousness of modifying exposure selectively, when the use of an enlarger can achieve the same purpose.

Because light does not pass any significant distance through the air or through lenses in going from the negative to the print, the contact process ideally preserves all the detail that is present in the negative. However, the exposure value (EV) range, the variation from darkest to lightest regions, is inherently greater in negatives than in prints.

Finished prints

When large format film is contact printed to create finished work, it is possible, but not easy, to use local controls to interpret the image on the negative. "Burning" and "dodging" (either increasing the amount of light that one area of the print receives, or decreasing the amount of light in order to achieve the ideal tonal range in a particular area) require painstaking work with photographic masks, or the use of a production contact printing machine (Arkay, Morse, Burke and James are manufacturers who make contact printing machines).

Some alternative processes or non-silver processes, such as van Dyke and cyanotype printing, must be contact printed. Medium or large format negatives are almost always used for these types of printing. Images from smaller formats may be transferred to a larger format negative for this purpose.

Production tools

Contact printing machines are more elaborate devices than the more familiar and widely available contact printing frames. They typically combine in a box the light source, intermediate glass stages, and a final glass stage for the negative and paper to be placed upon, as well as an elastic pressure plate to keep the negative and the paper in tight contact. Dodging can be accomplished by placing fine tissue paper on the intermediate glass stages between the light source and the negative/paper sandwich to modify the exposure locally. The benefit to such time intensive techniques is the ability to then make multiple prints with negligible variation, at full production speed.

Other uses for the technique

Contact printing was also once used in photolithography, and in printed circuit manufacturing.

The contact exposure process usually refers to a film negative used in conjunction with printing paper, but the process may be used with any transparent or translucent original image printed by contact onto a light sensitive material. Negatives or positives on film or even paper may for various purposes be used to make contact exposures onto different films and papers. Intermediary products such as internegatives, interpositives, enlarged negatives, and contrast controlling masks are often made using contact exposures.

Computer screens and other electronic display devices provide an alternative approach to contact printing. A permanent image (negative, positive film or transparency, or translucent original) is not used, instead the light sensitive material is exposed directly to the display device in a dark room for a controllable duration.[3] The resulting image generated by this mixed digital/analogue technique has been coined "laptopogram". While limited by the image display device resolution, which can be much inferior to film negatives, the widespread use of electronic displays provides great potential to this unorthodox contact printing method.

Artistic and practical considerations

Photographers praise the beautiful intermediate gray or color gradation that results from making prints this way. Each print is necessarily the same size as the corresponding image on the negative. This makes contact prints from large-format negatives, especially 5×7 inch and larger, most usable for fine-art work. Smaller contact prints, from films and formats such as 135 film cassettes, 35 mm (24×36 mm images), and 120/220 roll film (6 cm), are useful for evaluation of exposure, composition, and subject.

It is cheaper and easier to avoid making conventional prints of all the exposures with an enlarger; the photographer prints only the best negatives. Selection is usually made using a loupe — a special magnifying glass with a transparent base — to examine the tiny prints, still aligned as they are on the negative strips. Negatives themselves can be examined with a loupe, but blacks and whites are the reverse of what is seen through the view finder (hence: a negative), which makes it slightly more difficult to interpret the images. Contact sheets can easily be stored in files in the dark, along with the negatives.

Famous photographers

Edward Weston made the most of his pictures using contact print technique.

See also


External links

Media related to Lua error in package.lua at line 80: module 'strict' not found. at Wikimedia Commonsde:Kontaktkopie#Kontaktabzug