1,4-Dioxane

From Infogalactic: the planetary knowledge core
(Redirected from Dioxan)
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

1,4-Dioxane
Chemical structure of dioxane
1,4-dioxane
Names
IUPAC names
1,4-Dioxane
1,4-Dioxacyclohexane
Other names
[1,4]Dioxane
p-Dioxane
[6]-crown-2
Diethylene dioxide
Diethylene ether
Dioxan
Identifiers
123-91-1 YesY
ChEBI CHEBI:47032 YesY
ChEMBL ChEMBL453716 YesY
ChemSpider 29015 YesY
DrugBank DB03316 YesY
EC Number 204-661-8
Jmol 3D model Interactive image
KEGG C14440 YesY
UNII J8A3S10O7S YesY
  • InChI=1S/C4H8O2/c1-2-6-4-3-5-1/h1-4H2 YesY
    Key: RYHBNJHYFVUHQT-UHFFFAOYSA-N YesY
  • InChI=1/C4H8O2/c1-2-6-4-3-5-1/h1-4H2
    Key: RYHBNJHYFVUHQT-UHFFFAOYAN
  • O1CCOCC1
Properties
C4H8O2
Molar mass 88.11 g·mol−1
Appearance Colorless liquid[1]
Odor mild, ether-like[1]
Density 1.033 g/mL
Melting point 11.8 °C (53.2 °F; 284.9 K)
Boiling point 101.1 °C (214.0 °F; 374.2 K)
Miscible
Vapor pressure 29 mmHg (20°C)[1]
Thermochemistry
196.6 J·K−1·mol−1
-354 kJ/mol
-2363 kJ/mol
Vapor pressure {{{value}}}
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

1,4-Dioxane, often simply called dioxane because the 1,2 and 1,3 isomers of dioxane are rare, is a heterocyclic organic compound. It is a colorless liquid with a faint sweet odor similar to that of diethyl ether. It is classified as an ether. Dioxane is used mainly as a stabilizer for the solvent trichloroethane. It is an occasionally used solvent for a variety of practical applications as well as in the laboratory.

Synthesis and structure

Dioxane is produced by the acid-catalysed dehydration of diethylene glycol, which in turn arises from the hydrolysis of ethylene oxide. The molecule is centrosymmetric, meaning that it adopts a chair conformation, typical of relatives of cyclohexane. The molecule is conformationally flexible, and the boat conformation is easily adopted, as required for chelation to metal cations. In 1985, the global production capacity for dioxane was between 11,000 and 14,000 tons.[2] In 1990, the total U.S. production volume of dioxane was between 10,500,000 and 18,300,000 pounds (5,250 to 9,150 tons).[3]

Dioxane has three isomers: in addition to 1,4-dioxane, 1,2-dioxane and 1,3-dioxane are also known.

The three isomers of dioxane.
Small blue numbers show numbering of atoms in rings.

Uses

Dioxane is primarily used as a stabilizer for 1,1,1-trichloroethane for storage and transport in aluminium containers. Normally aluminium is protected by a passivating oxide layer, but when these layers are disturbed, highly reactive metallic aluminium is exposed to the chlorocarbon. This aluminium reacts with 1,1,1-trichloroethane to give aluminium trichloride, which in turn catalyses the dehydrohalogenation of the remaining 1,1,1-trichloroethane to vinylidene chloride and hydrogen chloride. Reflecting its properties as a ligand, dioxane "poisons" the aluminum trichloride catalyst, by formation of an adduct.[2] Apart from its use as a stabilizer, dioxane is used in a variety of applications as a solvent, e.g. in inks and adhesives.

Solvent properties

While diethyl ether is rather insoluble in water, dioxane is miscible and in fact is hygroscopic. This water miscibility is a favorable property for some industrial applications.[citation needed] At standard pressure, the mixture of water and dioxane in the ratio 17.9:82.1 by mass is a positive azeotrope that boils at 87.6 °C.[4] Dioxane is a versatile aprotic solvent. The oxygen atom is Lewis basic, so it is able to solvate many inorganic compounds. Because of its lower toxicity, it is substituted for tetrahydrofuran (THF) in some processes. However, it has a higher boiling point (101 °C versus 66 °C for THF), which is important when reactions are to be conducted at a higher temperature.

The oxygen centres are Lewis basic, and so dioxane serves as a chelating diether ligand. It reacts with Grignard reagents to precipitate the magnesium dihalide. In this way, dioxane is used to drive the Schlenk equilibrium.[2] Dimethylmagnesium is prepared in this manner:[5][6]

2 CH3MgBr + (C2H4O)2 → MgBr2(C2H4O)2 + (CH3)2Mg

Dioxane is used as an internal standard for proton NMR spectroscopy in D2O.[7]

Binary phase diagram for the system 1,4-dioxane/water

Toxicology

Safety

Dioxane has an LD50 of 5170 mg/kg,[2] making it less acutely toxic than table salt (3000 mg/kg).[8] This compound is irritating to the eyes and respiratory tract. Exposure may cause damage to the central nervous system, liver and kidneys.[9] Accidental worker exposure to 1,4-dioxane has resulted in several deaths.[10] Dioxane is classified by the National Toxicology Program as "reasonably anticipated to be a human carcinogen".[11] It is also classified by the IARC as a Group 2B carcinogen: possibly carcinogenic to humans because it is a known carcinogen in other animals.[12] The U.S. Environmental Protection Agency classifies dioxane as a probable human carcinogen (having observed an increased incidence of cancer in controlled animal studies, but not in epidemiological studies of workers using the compound), and a known irritant (with a no-observed-adverse-effects level of 400 milligrams per cubic meter) at concentrations significantly higher than those found in commercial products.[13] Under Proposition 65, dioxane is classified in the U.S. State of California to cause cancer.[14] Animal studies in rats suggest that the greatest health risk is associated with inhalation of vapors in the pure form.[15][16][17]

Like some other ethers, dioxane combines with atmospheric oxygen upon prolonged exposure to air to form potentially explosive peroxides. Distillation of dioxanes concentrates these peroxides increasing the danger.

Environment

Dioxane has affected groundwater supplies in several areas. Dioxane at the level of 1 μg/L (~1 ppb) has been detected in many locations in the US.[3] In the State of New Hampshire alone in 2010 it had been found at 67 sites, ranging in concentration from 2 ppb to over 11,000 ppb. Thirty of these sites are solid waste landfills, most of which have been closed for years. It also has low toxicity to aquatic life and can be biodegraded via a number of pathways.[18] The problems are exacerbated since dioxane is highly soluble in water, does not readily bind to soils, and readily leaches to groundwater. It is also resistant to naturally occurring biodegradation processes. Due to these properties, a dioxane plume is often much larger (and further downgradient) than the associated solvent plume.

Cosmetics

As a byproduct of the ethoxylation process, a route to some ingredients found in cleansing and moisturizing products, dioxane can contaminate cosmetics and personal care products such as deodorants, shampoos, toothpastes and mouthwashes.[19][20] The ethoxylation process makes the cleansing agents, such as sodium lauryl sulfate, less abrasive and offers enhanced foaming characteristics. 1,4-Dioxane is found in small amounts in some cosmetics, a yet unregulated substance used in cosmetics in both China and the U.S.[21]

In 2008, testing sponsored by the U.S. Organic Consumers Association found dioxane in almost half of tested organic personal-care products.[22] Since 1979 the U.S. Food and Drug Administration (FDA) have conducted tests on cosmetic raw materials and finished products for the levels of 1,4-dioxane.[23] 1,4-Dioxane was present in ethoxylated raw ingredients at levels up to 1410 ppm, and at levels up to 279 ppm in off the shelf cosmetic products.[23] Levels of 1,4-dioxane exceeding 85 ppm in children's shampoos indicate that close monitoring of raw materials and finished products is warranted.[23] While the FDA encourages manufacturers to remove 1,4-dioxane, it is not required by federal law.[24]

See also

References

  1. 1.0 1.1 1.2 Cite error: Invalid <ref> tag; no text was provided for refs named PGCH
  2. 2.0 2.1 2.2 2.3 Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. Schneider, C. H.; Lynch, C. C.: The Ternary System: Dioxane-Ethanol-Water in J. Am. Chem. Soc., 1943, vol. 65, pp 1063–1066. doi:10.1021/ja01246a015
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. 1,4-Dioxane (1,4-Diethyleneoxide). Hazard Summary. U.S. Environmental Protection Agency. Created in April 1992; Revised in January 2000. Fact Sheet
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.
  19. Tenth Report on Carcinogens. U.S. Department of Health and Human Services, Public Health Service, National Toxicology Program, December 2002.
  20. Lua error in package.lua at line 80: module 'strict' not found.
  21. Lua error in package.lua at line 80: module 'strict' not found.
  22. Lua error in package.lua at line 80: module 'strict' not found.
  23. 23.0 23.1 23.2 Lua error in package.lua at line 80: module 'strict' not found.
  24. FDA/CFSAN--Cosmetics Handbook Part 3: Cosmetic Product-Related Regulatory Requirements and Health Hazard Issues. Prohibited Ingredients and other Hazardous Substances: 9. Dioxane