Micro-pulling-down

The micro-pulling-down (µ-PD) method is a crystal growth technique based on continuous transport of the melted substance through micro-channel(s) made in a crucible bottom. Continuous solidification of the melt is progressed on a liquid/solid interface positioned under the crucible. In a steady state, both the melt and the crystal are pulled-down with a constant (but generally different) velocity.

Many different types of crystal are grown by this technique, including Y₃Al₅O₁₂, Si, Si-Ge, LiNbO₃, α-Al₂O₃, Y₂O₃, Sc₂O₃, LiF, CaF₂, BaF₂, etc.

Crystal growth routine

Standard routine procedure used in the growth of most of µ-PD crystals is well developed. The general stages of the growths include:

• charging of the crucible with starting materials (mixture of powders),
• heating of the crucible until starting materials in the crucible are completely melted,
• upward displacement of the seed until its contact with the meniscus or crucible,
• formation of the meniscus and partial melting of the seed top,
• correction of the shape of the meniscus through appropriate adjustment of crucible temperature and position of the seed crystal,
• crystal growth through pulling of the seed in downward direction,
• separation of the as grown crystal from the meniscus,
• and cooling of the system (including the crystal and the crucible) to room temperature

See also

• Crystal growth
• Czochralski process
• Float-zone silicon
• Verneuil process
• Laser-heated pedestal growth
• Flux method
• Yttrium aluminium garnet
• Scandium(III) oxide
• Sapphire
• Lithium niobate