Frankston railway line

From Infogalactic: the planetary knowledge core
(Redirected from Frankston line)
Jump to: navigation, search
Frankston railway line, Melbourne
Frankston line map
Line details
Completed 1882
Length 42.7 km (26.5 mi)
Tracks Quadruple to Caulfield, Triple to Moorabbin, then remainder - Double Track
Used by Metro Trains Melbourne & Freight to Long Island
Service pattern Stops all stations, with express services during peak
Rolling stock Comeng, Siemens, X'Trapolis 100
Connections Sandringham, Pakenham, Cranbourne and Stony Point lines
Former connections Rosstown Railway
Railways in Melbourne

The Frankston railway line is a bayside suburban electrified railway in Melbourne, Australia. The line runs from the City Loop to Frankston and continues on to Stony Point as the Stony Point line. Apart from suburban electric trains, the tracks are also used for rail freight transport to and from the Steel mills near Hastings. The Frankston line is part of Melbourne's Metlink integrated ticketing system in Zones 1 and 2.

Description

The Frankston line runs south from Caulfield, functioning from the main line to Pakenham and Gippsland, and runs through built-up areas for its entire length. From Mentone the line is never more than about 1 kilometre (0.6 mi) from the eastern shore of Port Phillip, and runs alongside the Nepean Highway for much of its length.

After Caulfield, the line traverses flat country and has fairly minor earthworks, and has numerous level crossings. The level crossing near Glenhuntly railway station is one of Melbourne's four crossings with tram tracks, and the only one with three railway tracks crossing two tramway tracks.

Infrastructure

The Frankston railway line shares four tracks with the line to Dandenong and beyond from near Richmond to Caulfield, running next to the Sandringham line as far as South Yarra.

From Caulfield, the Frankston line has three tracks to Moorabbin. The centre track is signalled for bidirectional operation, allowing for express trains overtaking stopping trains in the peak direction. From Moorabbin to Frankston the line is double track.

Power signalling is provided throughout, and intermediate terminating facilities are provided at Moorabbin, Cheltenham, Mordialloc, and Carrum. Stabling facilities for suburban trains are provided at Mordialloc, Carrum, and Frankston.

Services

A complete journey between Flinders Street and Frankston stations takes approximately 58 minutes.[citation needed] In peak times express trains are run from Frankston, using the triplicated track to overtake movements of all-station services. Additional stopping all stations trains operate to supplement the express patterns. In off peak periods, trains stop at all stations.

Stopping patterns

On weekdays, most services stop all stations and run direct to and from Flinders Street. Citybound morning peak services and outbound evening peak services run express between South Yarra and Cheltenham, stopping at Caulfield and (only for morning citybound services) Malvern. Some citybound morning services also serve Highett and Moorabbin before running express. All services running direct to and from Flinders Street on weekdays also extend beyond Flinders Street to Werribee, Laverton or Williamstown on the Werribee and Williamstown lines.

During the morning peak, citybound express services are supplemented by all-stations services running anticlockwise through the City Loop, with some originating from either Carrum or Mordialloc. Outbound services either stops all stations or runs express from South Yarra to Caulfield, with select services terminating at Moorabbin or Mordialloc. During the evening peak, outbound all-stations services runs clockwise through the City Loop, with most services terminating at Cheltenham, Mordialloc or Carrum. Citybound services stops at all stations from Frankston.

Weekend early morning services run direct to and from Flinders Street, and run anticlockwise through the City Loop for the rest of the day.

Between November 2015 and June 2016, weekday express services are temporarily stopping at all stations between Caulfield and Cheltenham due to the closure of the third track for the removal of level crossings on that section.[1]

History

The line from Caulfield to Mordialloc opened in December 1881 and extended to Frankston in August 1882. The Frankston line was electrified in three stages between March and August 1922.

Power signaling of the line was begun in 1933 with the section from Caulfield to Glenhuntly, and the remainder of the line was converted in a number of stages from 1958 to 1986. Amplification of the line from Caulfield to Moorabbin to three tracks was announced by transport minister Steve Crabb in 1984, at a cost of $10 million to save 10 minutes on travel times from Frankston. Work begun in July that year and was due for completion by the end of 1985.[2] However, it did not enter service until June 1986, with three track working commencing in July the same year.[3]

On 1 March 2007, Zone 3 in the Melbourne Metropolitan rail system was abolished (see Metcard), so that all stations between Patterson and Frankston are now in Zone 2.

The Australian Greens have proposed in their People Plan for the Victorian election 2010 (http://peopleplan.greens.org.au/map) to extend electrification of the Frankston/Stony Point Line and add new stations at Langwarrin and Mornington onto the suburban train network, allowing for increased capacity, increased frequency and easier integration.

In November 2010, both the Victorian Labor Party and the Victorian Liberal Party approved a Premium Station to be built between Highett and Cheltenham to serve the Westfield Southland shopping centre.[4] The railway station was to cost $13-million, would have had two Railway platforms and was predicted to be used by 1,400 passengers daily. The project was expected to be completed by 2014,[5] but the project has yet to come to fruition in any form.

Line guide

Bold stations are termini, where some train services terminate; italic stations are staffed; and stations with an asterisk (*) are manned only during morning peak.

Branches from the Cranbourne and Pakenham lines at Caulfield

Frankston railway line
0.0 km Flinders Street (FSS) Zone 1
City Loop
2.4 km Richmond (RMD) Zone 1
Burnley group
CityLink
Yarra River, Cremorne Railway Bridge
4.2 km South Yarra (SYR) Zone 1
Sandringham line
5.4 km Hawksburn (HKN) Zone 1
6.7 km Toorak (TOR) Zone 1
7.4 km Armadale (ARM)* Zone 1
8.9 km Malvern (MAL)* Zone 1
10.6 km Caulfield (CFD) Zone 1
Cranbourne and Pakenham lines
12.2 km Glenhuntly (GHY)* Zone 1
Rosstown Railway
13.7 km Ormond (OMD)* Zones 1 & 2
14.5 km McKinnon (MCK) Zones 1 & 2
15.3 km Bentleigh (BEN) Zones 1 & 2
Elster Creek branch
16.1 km Patterson (PAT) Zone 2
17.2 km Moorabbin (MRN) Zone 2
18.8 km Highett (HIG) Zone 2
19.4 km Southland (STD) (to open 2016) Zone 2
21.2 km Cheltenham (CTM) Zone 2
23.1 km Mentone (MEN) Zone 2
24.7 km Parkdale (PKD) Zone 2
26.0 km Mordialloc (MOR) Zone 2
Mordialloc Creek
29.1 km Aspendale (ASP) Zone 2
30.4 km Edithvale (EDI) Zone 2
32.1 km Chelsea (CSA) Zone 2
33.4 km Bonbeach (BON) Zone 2
Patterson River
34.9 km Carrum (CAR) Zone 2
38.2 km Seaford (SEA) Zone 2
40.2 km Kananook (KAN) Zone 2
42.7 km Frankston (FKN) Zone 2
Stony Point line

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. [1], additional text.

External links