Robinvale railway line

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Robinvale railway line, Victoria
Robinvale line map
Line details
Opened 1924
Completed 1926
Closed 1978 (for passengers)
Fate Freight line
Length 511 km (317.5 mi)
Stations 12 (some demolished)
Tracks Single track
Used by Pacific National
Service pattern Grain to Boort, Quambatook and Manangatang
Rolling stock Grain Hoppers
Connections Junction for the Kulwin Line at Korong Vale
Rail transport in Victoria

The Robinvale railway line is a freight only country railway line in north-western Victoria, Australia. The line branches from the Mildura line at Dunolly, and at Inglewood the Eaglehawk – Inglewood line connects with the Piangil line outside Bendigo. The parallel Kulwin line junctions from the Robinvale line at Korong Vale then continues northward.[1]

History

The line was opened from Inglewood to Korong Vale in 1882, and first extended towards Charlton in what is now the Kulwin line. Korong Vale to Boort opened in 1883, and to Quambatook in 1894. It was extended to Ultima in 1900, to Chillingollah in 1909, to Manangatang in 1914, to Annuello in 1921, and Robinvale in 1924. It was later extended even further, via the Lette railway line to Koorakee, New South Wales in 1929. This involved a lift-span bridge over the Murray River to take the line into New South Wales.[2] The section in New South Wales closed in 1943.[3] Access to Melbourne was originally from the Bendigo line via Bridgewater, until the opening of the Dunolly to Inglewood route to the Mildura line in 1888.

The last regular passenger service on the line ran from Bendigo to Robinvale on 3 June 1978 and was operated by a DERM.[4] It was replaced by Bendigo – Ultima and Swan Hill – Robinvale buses from 5 June 1978.[4]

Operation

Today the line operates using the Train Order Working system of safeworking, with crossing loops provided at Dunolly, Korong Vale, and Robinvale.[5] Speed limits are set between 65 and 55 km/h (40.4 and 34.2 mph) to Manangatang, with all mainline locomotives permitted. Beyond there speed limit is 25 km/h (15.5 mph) and G and XR class locomotives are banned.[5]

The line today is seen as required for grain services,[6] and containerised freight to Boort where an intermodal is operated by Wimmera Container Lines.[7] In 2008 the line was booked out for upgrades to the track and level crossings from Ultima to Robinvale.[6] In April 2008 it was announced that the Korong Vale – Quambatook section of the line would be upgraded as part of the Victorian core grain network, in a $23.7 million package with 6 other lines. The Dunolly – Korong Vale section had already been upgraded.[8]

Line guide

Current named locations on the line, distances measured via Ballan on the Ballarat line.[5]

Robinvale railway line
209.099 Mildura line at Dunolly
229.875 Llanelly
236.000 Arnold Block Point
Eaglehawk - Inglewood line
248.741 Inglewood
255.252 Kurting
Wedderburn
280.863 Korong Vale Crossing Loop
281.420 Korong Vale
Kulwin line
289.313 Borung
291.000 Mysia Block Point
308.112 Boort G.E.B Siding
309.971 Boort
323.157 Barraport
329.154 Gredgwin
336.341 Oakvale
344.000 Quambatook Block Point
345.341 Quambatook
357.894 Cannie
369.138 Lalbert
394.003 Ultima
396.000 Ultima Block Point
403.046 Gowanford
413.723 Waitchie
426.472 Chillingollah
439.533 Chinkapook
448.787 Cocamba
456.200 Manangatang
457.280 Manangatang Block Point
465.464 Bolton
479.143 Annuello
497.148 Bannerton
510.445 Robinvale

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Robinvale to Lette Railway Wurr, Chris Australian Railway Historical Society Bulletin, April, 1999 pp123-138
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 5.2 Lua error in package.lua at line 80: module 'strict' not found.
  6. 6.0 6.1 Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.

External links