Nassau (Staten Island Railway station)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Nassau
Staten Island Railway rapid transit station
300px
Nassau station from the St. George-bound platform in July 2014.
Station statistics
Address Saint Andrews Place & Bethel Avenue
Staten Island, NY 10307
Borough Staten Island
Locale Tottenville, Charleston
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Services SIR Main Line
Transit connections Bus transport New York City Bus: S78
Structure At-grade
Platforms 2 side platforms
Tracks 2
Other information
Opened after 1922[1]'
Closed April 2016[2] (projected)
Station succession
Preceding station   MTA NYC logo.svg Staten Island Railway   Following station
toward St. George
 Main Line
toward Tottenville
Main Line
under construction
toward Tottenville

Nassau is a Staten Island Railway station located roughly between the neighborhoods of Tottenville (to the south) and Charleston (to the north), in Staten Island, New York.

History

File:Nassau Station (14377220604).jpg
View of the station from the overpass, showing the closed portions of the platforms.

The station opened in 1921, over sixty years after the opening of the 1860 opening of the Staten Island Railway from Annadale to Tottenville.[1] The station was named for the nearby Nassau Smelting & Refining Company,[3] which extended the station to its current length in the 1970s.[4] The factory opened in 1882 as the Tottenville Copper Works and changed its name in 1931 to the Nassau Smelting & Refining Company. As a subsidiary of Bell Telephone System's Western Electric division, the factory recycled obsolete telephone equipment and manufactured copper wire and solder. It would later be called AT&T Nassau Metals. For more than 20 years the site was a vacant brownfield, until 2007, when the land was cleaned up and is now environmentally safe for future development.[5][6]

The station extension was built on timber covered with asphalt. Nassau, along with the nearby Atlantic station (also built next to a factory) were not modernized in the 1990s along with the rest of the line, because of the proposed station at Arthur Kill Road which was set to replace both stations. Due to structural deterioration of the extension and lack of maintenance, on September 2, 2010 most of the station towards the eastern end was closed off.[4][7] Construction on the replacement station, now simply called Arthur Kill, began in October 2013 and is set to open in April 2016.[2][4][3]

Station layout

M - Crossover between platforms
P
Platforms		 Side platform, doors will open on the right for the last car only
Southbound ← Main toward Tottenville (Atlantic)
(No service: Arthur Kill)
Northbound → Main toward St. George (Richmond Valley) →
Side platform, doors will open on the right for the last car only

In the St. George bound direction, the station is located at Bethel Avenue and Saint Andrews Place. In the Tottenville bound direction it is at the end of Nassau Place. This station contains two four-car length (300 foot)[4] side platforms, but three-fourths of each platform towards the station's east (railroad north) end is closed and walled-off. Much like the nearby Atlantic station, only the last car of a train serves the station.[4][8] An overpass and exits are located at the west (railroad south) end. The staircase to St. Andrews Place on the east side has no canopy.

An abandoned siding sits next to the southbound (geographically northern) platform, which used to serve the Nassau Smelting & Refining Company.[4][9]

References

  1. ↑ 1.0 1.1 The line to Tottenville was open by 1860 according to Lua error in package.lua at line 80: module 'strict' not found., however Nassau did not appear in a SIRT timetable from 1921 according to Lua error in package.lua at line 80: module 'strict' not found. A map from 1922 also did not list the station according to Lua error in package.lua at line 80: module 'strict' not found. A system map from 1949 did list the Nassau station according to Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ 2.0 2.1 [1]
  3. ↑ 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ 4.0 4.1 4.2 4.3 4.4 4.5 Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=Nassau_(Staten_Island_Railway_station)&oldid=697186064"