PEEK

For other uses, see PEEK (disambiguation).

PEEK
Density	1320 kg/m3
Young's modulus (E)	3.6 GPa
Tensile strength (σt)	90-100 MPa
Elongation @ break	50%
notch test	55 kJ/m2
Glass temperature	143 °C
melting point	~343 °C
Thermal Conductivity	0.25 W/m.K
Water absorption, 24 hours (ASTM D 570)	- 0.1%
source:

Polyether ether ketone (PEEK) is a colourless organic thermoplastic polymer in the polyaryletherketone (PAEK) family, used in engineering applications.

Synthesis

PEEK polymers are obtained by step-growth polymerization by the dialkylation of bisphenolate salts. Typical is the reaction of 4,4'-difluorobenzophenone with the disodium salt of hydroquinone, which is generated in situ by deprotonation with sodium carbonate. The reaction is conducted around 300 °C in polar aprotic solvents - such as diphenyl sulphone.

Properties

PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. The processing conditions used to mold PEEK can influence the crystallinity, and hence the mechanical properties. The Young's modulus is 3.6 GPa and its tensile strength 90 to 100 MPa. PEEK has a glass transition temperature of around 143 °C (289 °F) and melts around 343 °C (662 °F). Some grades have a useful operating temperature of up to 250 °C (482 °F) . The thermal conductivity increases nearly linearly versus temperature between room temperature and solidus temperature. It is highly resistant to thermal degradation as well as attack by both organic and aqueous environments. It is attacked by halogens and strong Bronsted and Lewis acids as well as some halogenated compounds and aliphatic hydrocarbons at high temperatures. It is soluble in concentrated sulfuric acid at room temperature, although dissolution can take a very long time unless the polymer is in a high surface area to volume form such as a fine powder or thin film.

Applications

Because of its robustness, PEEK is used to fabricate items used in demanding applications, including bearings, piston parts, pumps, HPLC columns, compressor plate valves, and cable insulation. It is one of the few plastics compatible with ultra-high vacuum applications. PEEK is considered an advanced biomaterial used in medical implants. It is finding increased use in spinal fusion devices and reinforcing rods. It is extensively used in the aerospace, automotive, and chemical process industries. PEEK's mechanical properties at elevated temperatures have led to it being used in at least two varieties of Reprap extruder as thermal insulation. This means the main mechanical structure of the extruder can be made of the same material that is being extruded, provided that the PEEK insulator prevents heat from traveling beyond the intended melt zone.

Machining Options

PEEK melts at a relatively high temperature (343 °C / 649.4 °F) compared to most other thermoplastics. In the range of its melt temperature it can be processed using injection moulding or extrusion methods. Recently a German company demonstrated for the first time the technical possibility of processing granular PEEK into filament form and 3D printing parts from the filament material using Fused deposition modeling – FDM (or Fused Filament Fabrication - FFF) technology.

In its solid state PEEK is readily machinable, for example, by (CNC) milling machines and is commonly used to produce high-quality plastic parts that are thermostable and both electrically and thermally insulating. PEEK is often considered a high-end engineering plastic, such as delrin, PTFE or nylon.

Shape memory PEEK in biomechanical applications

PEEK is not traditionally a shape memory polymer; however, recent advances in processing have allowed shape memory behavior in PEEK with mechanical activation. This technology has expanded to applications in orthopedic surgery.

External References

• Application note on methods of characterizing the crystallinity of PEEK
• Article about 3D-print revolution
• [1]
• [2]