Guangzhao Dam

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Guangzhao Dam
Guangzhao Dam is located in China
Guangzhao Dam
Location of Guangzhao Dam in China
Country China
Location Guangzhao, Guanling County, Guizhou Province
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Status In use
Construction began May 2003
Opening date 2008
Dam and spillways
Type of dam Gravity
Impounds Beipan River
Height 200.5 metres (658 ft)
Length 410 metres (1,345 ft)
Dam volume 2,800,000 cubic metres (98,881,067 cu ft)
Spillways 3
Spillway type Service, surface crest
Spillway capacity 9,857 cubic metres per second (348,097 cu ft/s)
Reservoir
Creates Guangzhao Reservoir
Total capacity 3,254,000,000 cubic metres (2,638,061 acre·ft)
Catchment area 13,548 square kilometres (5,231 sq mi)
Surface area 51.54 square kilometres (20 sq mi)
Power station
Installed capacity 1,040 MW
Annual generation 2,745 GWh (mean)

The Guangzhao Dam is a concrete gravity dam on the Beipan River near Guangzhao in Guanling County, Guizhou Province, China. The main purpose of the project is hydroelectric power generation with additional purposes of water regulation and irrigation. It creates the uppermost or head reservoir on the Beipan and was constructed between 2003 and 2008.

Construction

Construction on the dam began in May 2003 and the river was diverted in October 2004.[1] Reservoir filling began in 2007 and by 2008, the dam and power plant were complete. On June 28, 2010, a landslide in the area of the dam that killed 99 locals was believed to be caused by seismic effects from the reservoir.[2]

Specifications

The dam is 200.5 metres (658 ft) tall and 410 metres (1,345 ft) wide and composed of roller-compacted concrete. It also contains three spillway chutes on its surface. Each spillway is controlled by a 16 metres (52 ft) wide and 20 metres (66 ft) tall floodgate and they have a combined maximum discharge of 9,857 cubic metres per second (348,097 cu ft/s). The dam also contains a bottom outlet works for draining the reservoir which a maximum discharge capacity of 799 cubic metres per second (28,216 cu ft/s).[1]

See also

References

  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.