Italian cruiser Saetta
![]() Saetta, date unknown
|
|
History | |
---|---|
![]() |
|
Name: | Saetta |
Builder: | Regio Cantiere di Castellammare di Stabia |
Launched: | 30 May 1887 |
Commissioned: | 16 February 1888 |
Struck: | 14 May 1908 |
Fate: | Broken up, 1908 |
General characteristics | |
Class & type: | Folgore-class torpedo cruiser |
Displacement: | 364 metric tons (358 long tons; 401 short tons) |
Length: | 56.7 meters (186 ft) |
Beam: | 6.31 m (20.7 ft) |
Draft: | 2.15 m (7 ft 1 in) |
Installed power: |
|
Propulsion: | 2 × double-expansion steam engines |
Speed: | 17 knots (31 km/h; 20 mph) |
Complement: | 57–70 |
Armament: |
|
Saetta was a Folgore-class torpedo cruiser built for the Italian Regia Marina (Royal Navy) in the 1880s.
Contents
Design
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Saetta was 56.7 meters (186 ft) long overall and had a beam of 6.31 m (20.7 ft) and an average draft of 2.15 m (7 ft 1 in). She displaced 364 metric tons (358 long tons; 401 short tons) normally. Her propulsion system consisted of a pair of horizontal double-expansion steam engines each driving a single screw propeller, with steam supplied by four coal-fired locomotive boilers. Saetta could steam at a speed of 17 knots (31 km/h; 20 mph) from 2,130 indicated horsepower (1,590 kW). She had a crew of between 57–70.[1]
The primary armament for Saetta was three 14 in (356 mm) torpedo tubes. She was also equipped with two 57 mm (2.2 in) /43 guns and four 37 mm (1.5 in) /25 guns, all mounted singly. The ship carried no armor protection.[1]
Service history
Saetta was built at the Regio Cantiere di Castellammare di Stabia (Royal Dockyard in Castellammare di Stabia). She was launched on 30 May 1887 and was completed on 16 February 1888.[1] That year, she took part in the annual fleet maneuvers, along with five ironclads, a protected cruiser, the torpedo cruisers Tripoli, Goito, and Folgore, and numerous smaller vessels. The maneuvers consisted of close-order drills and a simulated attack on and defense of La Spezia. Later that year, the ship was present during a naval review held for the German Kaiser Wilhelm II during a visit to Italy.[2] In 1892, the Regia Marina used Saetta to conduct experiments with oil-fired boilers.[1]
In 1893, Saetta was laid up in Naples for the year; at the time, the Italian fleet mobilized only a handful of vessels for the annual training maneuvers, preferring to keep the most modern vessels in reserve to reduce maintenance costs.[3] The following year, Saetta was commissioned for two months to take part in the annual fleet maneuvers; she spent the rest of the year in reserve.[4] She took part in the annual fleet maneuvers in the Reserve Division, along with the ironclad Italia and Andrea Doria and the torpedo cruiser Urania.[5] Saetta was stationed in La Spezia in the 1st Maritime Department, along with her sister ship Folgore in 1895,[6] though the latter had been badly damaged in a collision and was decommissioned.[1]
From 1897 to 1900, the ship served as a torpedo training ship. The following year, she was transferred to the gunnery school, where she train gunners for the fleet. In 1902, her gun armament was expanded to increase the types of weapons available for training.[1] That year, the gunnery school also included the old ironclads Regina Maria Pia and Affondatore; Saetta was used only for target practice at sea.[7] She was still serving in this capacity in 1904–05, along with the old ironclad Enrico Dandolo.[8] Saetta was ultimately discarded on 14 May 1908 and subsequently broken up for scrap.[1]
Notes
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Gardiner, p. 347
- ↑ Brassey, p. 453
- ↑ "Naval and Military Notes – Italy" (1893), p. 567
- ↑ "Naval and Military Notes – Italy" (1894, no. 196), p. 565
- ↑ "Naval and Military Notes – Italy" (1894, no. 197), p. 776
- ↑ "Naval and Military Notes – Italy" (1895), p. 90
- ↑ "Naval Notes – Italy", p. 1,075
- ↑ "Naval Notes – Italy", p. 1429
References
- Lua error in package.lua at line 80: module 'strict' not found.
- Lua error in package.lua at line 80: module 'strict' not found.
- Lua error in package.lua at line 80: module 'strict' not found.
- Lua error in package.lua at line 80: module 'strict' not found.
- Lua error in package.lua at line 80: module 'strict' not found.
- Lua error in package.lua at line 80: module 'strict' not found.
- Lua error in package.lua at line 80: module 'strict' not found.
- Lua error in package.lua at line 80: module 'strict' not found.