Kellyville railway station
|
Kellyville
|
||
|---|---|---|
| File:Sydney Metro Kellyville Station worksite, August 2015.jpg
Kellyville Station worksite, viewed from adjacent North West T-way
|
||
| Location | Samantha Riley Drive, Kellyville New South Wales Australia |
|
| Owned by | Transport for New South Wales | |
| Operated by | Northwest Rapid Transit | |
| Distance | 30km from Chatswood | |
| Platforms | 2 | |
| Train operators | Northwest Rapid Transit | |
| Connections | Bus | |
| Construction | ||
| Structure type | Elevated | |
| Parking | 1,200 spaces | |
| Bicycle facilities | 45 spaces | |
| Disabled access | Yes | |
| History | ||
| Opening | Early 2019 | |
| Services | ||
| ← Rouse Hill· Bella Vista→
|
||
Kellyville is an elevated Sydney Metro Northwest station being built by Impregilo-Salini and Northwest Rapid Transit (NRT) for Transport for New South Wales at Samantha Riley Drive, Kellyville, in Sydney, Australia. Train services from the station will run initially to Rouse Hill and Chatswood, with an expected journey time to Chatswood of around 33 minutes. As the New South Wales Government's Sydney's Rail Future strategy is delivered over the next 20 years, services are expected to be extended to the Sydney central business district (CBD), Bankstown and Hurstville. Kellyville Station is planned to open in 2019.[1][2]
History
Kellyville, on Sydney's rural fringes, was not considered suitable for new suburban development until 1988, when then Planning Minister Bob Carr abandoned the state's long-standing policy of concentrating new development along existing rail corridors. Instead, the government green-lit development in the area on the proviso that a corridor be preserved for mass transit to be built in future.[3] This corridor, which runs beside Old Windsor Road, was announced as the alignment for the North West T-way, a new bus rapid transit line 10 years later[4] and construction began in 2004. Kellyville's three T-way stations – known as Riley, Burns and Balmoral – opened in March 2007, providing commuters with fast bus access from Kellyville to the Parramatta CBD.[5] Commuters travelling to the Sydney CBD, however, needed to catch buses along the M2 Hills Motorway and congested Sydney Harbour Bridge.
The Government's 1998 plan also envisaged a future rail line to the Hills District, but only as far as Castle Hill.[4] Following dire warnings from the state's most senior rail bureaucrat about a looming capacity crunch on the rail system, a new "North West Rail Link" (NWRL) was proposed in 2005, featuring a station for Kellyville at the corner of Old Windsor and Burns roads – the site of the Burns T-way station, then under construction. A Burns Road Station remained government policy even when the NWRL was dumped in favour of the North West Metro proposal in 2008. The 2009 version of plan featured two stations, one at Burns Road, called Kellyville, and a second at Samantha Riley Drive.[6]
Design and construction
The Australian Labor Party was heavily defeated at the 2011 state election in part because of its tendency to announce, cancel and re-announce transport projects.[7] The incoming Liberal/Nationals government, led by Barry O'Farrell, had put a promise to build the NWRL at the centre of their election platform. During consultation and detailed design, it was decided that Burns Road would be replaced with two stations: Bella Vista, on the edge of the giant Norwest Business Park, and Kellyville. Kellyville Station would be built on a new railway viaduct (dubbed the "skytrain") above the existing Riley T-way station.
As part of the project's public–private partnership delivery model, a consortium was chosen to operate the stations and trains. To ensure that the stations were designed to be maintainable and with customer service in mind, the operator would also be responsible for designing and building the station buildings. (An Italian joint venture, Impregilo-Salini, was chosen to build the viaduct as part of a separate $340 million contract.) The successful "Operations, Trains and Stations" tenderer, NRT, includes MTR Corporation, which designed, built and operates the stations on the Mass Transit Railway in Hong Kong.[8][9][10]
Work on the new station began in June 2014.[11] The NWRL was rebranded Sydney Metro Northwest the following year.
See also
References
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Sydney Metro City & Southwest Project Overview Sydney Metro June 2015
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Norwest Station Transport for NSW
- ↑ North West Rail Link $340 million skytrain contract awarded Transport for NSW 18 December 2013
- ↑ $8.3 billion North West Rail Link to open in late 2019 Transport for NSW 16 June 2013
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
External links
- Kellyville Station description at Sydney Metro Northwest project website
- Northwest Rapid Transit corporate website
