Longwood (MBTA station)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

LONGWOOD
Longwood MBTA station, Brookline MA.jpg
An outbound train at Longwood station in May 2011
Location Chapel Street
Brookline, MA
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Owned by MBTA
Line(s) Lua error in package.lua at line 80: module 'strict' not found.
Platforms 2 side platforms
Tracks 2
Construction
Parking 11 spaces
Bicycle facilities 15 spaces
Disabled access Yes
History
Opened July 4, 1959[1]
Rebuilt Q2 2009
Traffic
Passengers (2011) 2,719 (weekday average boardings)[2]
Services
Preceding station   MBTA.svg MBTA   Following station
toward Riverside
Green Line

Longwood is a light rail stop on the MBTA Green Line "D" Branch, located on Chapel Street in Brookline, Massachusetts just north of Longwood Avenue. It serves the western end of the Longwood Medical Area, the Colleges of the Fenway, and residential areas of Brookline. The station opened with the rest of the line on July 4, 1959.[1] After renovation work completed in 2009, Longwood station is fully handicapped accessible from both Chapel Street and Riverway Park.

History

Original stations

File:B&A Chapel station, unknown date.jpg
Chapel station at an unknown date

The Boston and Worcester Railroad opened a 1.4-mile (2.3 km) branch from Brookline Junction to Brookline on April 10, 1848.[3] There was one intermediate stations on the branch - Longwood just south of Longwood Avenue.[4] The Charles River Branch Railroad extended the Brookline Branch to Newton Upper Falls in November 1852 and to Needham in June 1853, keeping the original B&W station for its service.[3][4]

The Sears Chapel was built in 1861 and the Church of Our Savior in 1868; sometime that decade Chapel station was opened as a flag stop located at Carlton Street.[5][6] The Boston and Albany Railroad bought back the line, then part of the New York and New England Railroad, in February 1883. It was double-tracked and extended to the B&A main at Riverside; "Newton Circuit" service via the Highland Branch and the main line began on May 16, 1886.[3]

Station consolidation

File:Longwood station and Sears Chapel (2), circa 1893.jpg
Sears Chapel and the 1893-built Longwood station shortly after its construction

As part of a general improvement program, the railroad replaced many of its original wooden stations with new stone buildings designed by H.H. Richardson and Shepley, Rutan and Coolidge and landscaped by Frederick Law Olmsted. All stations on the Highland Branch save for Longwood and Chapel were thus rebuilt between 1883 and 1892.

In April 1892, the B&A petitioned the Massachusetts Board of Railroad Commissioners to allow them to combine the two old stations into a single new station between their location. The railroad cited the closeness of the two stations, their poor locations, and traffic losses due to the electrified trolley line opened on nearby Beacon Street in 1889. The board referenced the railroad's arguments, the assent of the Brookline selectmen, and an overwhelming majority of residents and passengers in favor of the consolidation when giving their assent.[6]

The consolidated Longwood station was a low stone building by Shepley, Rutan and Coolidge, similar to the other stations on the line. Located on Chapel Street near Hawes Street, it opened in 1893.[7][8] A footbridge at Carlton Street - one of the only steel bridges in an Olmstead-designed park, though it was designed and built by Brookline's town engineer - was added by the town in mid-1894 to provide access to the Riverway Park. The bridge was closed in 1975 due to severe corrosion. As of 2015, the state is planning a controversial $2.7 million project to rebuild and reopen the footbridge.[9][10]

Conversion to trolley service

In June 1957, the Massachusetts Legislature approved the purchase of the branch by the M.T.A. from the nearly-bankrupt New York Central Railroad for conversion to a trolley line. Service ended on May 31, 1958.[3] The line was quickly converted for trolley service, and the line including Longwood station reopened on July 4, 1959.[1] The 1893-built station was torn down during the conversion to make room for a small parking lot.

Renovations

During the Brookline Village/Longwood Avenue Station Renovation Project, the MBTA renovated Longwood and Brookline Village stations for handicapped accessibility. The two stations received raised platforms to interface with low-floor trams, wooden ramps to access high-floor trams, and other upgrades. The MBTA originally planned to only offer handicapped access via the Chapel Street entrance to Longwood, but after it became apparent this was not sufficient, ramps were added from Riverway Park as well.[11] With work completed in the second quarter of 2009, Longwood station is fully handicapped accessible.[12]

Station layout

File:Longwood station, May 2012.JPG
Longwood station has two side platforms serving the line's two tracks
G
Street/
Platform level
Side platform, doors will open on the right
Outbound "D" Branch toward Riverside (Brookline Village)
Inbound "D" Branch toward Park Street / North Station (Fenway)
Side platform, doors will open on the right

Bus connections

No MBTA Bus routes stop directly at Longwood station. Seven routes - the CT2, CT3, 8, 19, 47, 60, and 65 - stop at the intersection of Longwood Avenue and Brookline Avenue, several blocks to the east.[13]

References

  1. 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 3.2 3.3 Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. 6.0 6.1 Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.

External links