RF resonant cavity thruster

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Lua error in package.lua at line 80: module 'strict' not found.

EmDrive/Cannae drive
Controversial invention
Inventor Roger Shawyer, Guido Fetta
Theory violation Conservation of momentum, Newton's Third Law

A radio frequency (RF) resonant cavity thruster is a proposed new type of electromagnetic thruster. Unlike conventional electromagnetic thrusters, they are designed to use no reaction mass, and to emit no directional radiation. Their design principles are not supported by prevailing scientific theories, and they apparently violate the law of conservation of momentum.[1]

A few variations on such thrusters have been proposed. Aerospace engineer Roger Shawyer designed the EmDrive in 2001, and has persistently promoted the idea since then through his company, Satellite Propulsion Research.[2][3] Chemical engineer Guido Fetta designed the Cannae Drive, based on similar principles. If they are found to work as claimed, providing thrust without consuming a propellant would have important applications to all areas of propulsion.[1][4][5][6][7]

Some independent teams of scientists, notably a team at Xi'an's Northwestern Polytechnical University (NWPU),[8] one at NASA's Eagleworks laboratories,[9] and another at the Dresden University of Technology in Germany,[10] have built prototypes of these designs and a number of their experiments have tentatively observed small net thrust.[11] This experimental work has been published in university journals,[12] conference proceedings,[11][13] and peer-reviewed journals.[14][15][16] Research is in progress to see if the positive results are caused by some as-yet-unknown phenomenon or by artifacts due to experimental error.

History

Electromagnetic propulsion designs have been around since the start of the 20th century, which operate on the principle of reaction mass. In the 1960s, extensive research was conducted on a variety of such drives: from ion thrusters that strip ions from propellant, accelerate them, and eject them; to plasma thrusters that eject plasma ions in a similar way with plasma currents, but do not require electrodes. The plasma in a plasma thruster can be generated from an intense source of microwave or other radio-frequency (RF) energy, in combination with a resonant cavity tuned to resonate at such a frequency.[17]

Searching for low-propellant space drives has been a goal of space exploration for much of this time. If a zero-propellant drive existed, it could potentially be used for travel in many environments. This has contributed to the enthusiasm for exploring such designs, even if they seem impossible.[4][5][6][7]

Since the publication of Isaac Newton's book Principia[18] science has understood that for every action there is an equal and opposite reaction. General Relativity of Albert Einstein did not change the principle that came to be known as conservation of momentum. Newton built his theories based on earlier work of Galileo, Copernicus, and Kepler. The principle requires that to create thrust force in one direction, some form of energy must be repelled at some speed in the opposite direction sufficient to balance the momentum around any closed surface that might be constructed to measure it. Reaction forces can be produced by accelerated mass like a conventional rocket, interaction with external electric or magnetic fields like the separate parts of an electric motor, particle beams like ion thrusters, or directional radio waves. Nozzle velocity is a key parameter in rockets.[19] If no mass is ejected the exhaust energy moves at light speed and requires F = P/c or about 300 megawatts per newton of force, making it less attractive than other propulsion systems.

The patent[20] of Roger J. Shawyer claims the thrust is generated in a closed cavity such that one end of the cavity receives a larger force than the opposite end. Electric heat turns liquid coolant into vapor, contributing to the force balance. A standing wave interference pattern is created by geometry, operating frequency and equal path lengths for all segments of the microwave. Stress energy of space is altered inside the microwave cavity by addition of the interference pattern in which nearly all of the electric and magnetic components are canceled out by two microwaves approaching each other with equal intensity on the same path. Most of the Poynting vectors are also canceled out. Puthoff's patent[21] shows how a small but detectable curl free potential can be created from interference patterns passing through shielded barriers. Otherwise if all of the microwaves remain inside the cavity and there is no net interaction with the vacuum, then there is no established theory to give external thrust to the device. Shawyer's claim[22] of 0.1 newton from 300 watts of power is not supported by conventional theories.

Controversy

The design of such thrusters, whether they work as claimed, and theories attempting to explain how they might work, are all matters of controversy. There is little consensus among those designing such drives about which theories are most plausible, and several theories are criticized as violations of conservation of momentum.[23]

The idea did not receive much attention when first proposed in the early 2000s, and experiments to test it have been limited in scope. Publicity about such thrusters has been maintained by inventors of specific designs promoting their own work.

Inventors have been unable to reliably demonstrate thrust from one of their own theoretical designs and few scientists take the claims about these designs seriously. Critics assert[who?] that positive results are misinterpretations of spurious effects mixed with experimental errors. Research teams that have seen tentatively positive results are continuing their work to remove potential sources of error, and to ascertain whether they can explain the observed thrust using traditional physics models.[24]

Designs and prototypes

EmDrive

In 2001, Shawyer founded Satellite Propulsion Research Ltd, in order to work on the EmDrive. He thought he could produce a drive that used a resonant cavity to produce thrust without propellant. The company was backed by a "Smart Award" grant from the UK Department of Trade and Industry.[6] The DTI grant totalled £250,000, spread out over three years.[25] By December 2002, he was demonstrating a working prototype, reporting a total thrust of about 0.02 newtons powered by an 850 W magnetron.[26] It was later reported that the device could only operate for a few tens of seconds before the magnetron failed, due to overheating.[27][28]

Second device and New Scientist article

In October 2006, Shawyer conducted tests on a new water-cooled prototype, which increased thrust to 0.1 newtons (0.022 lbf) and ran on 300 watts (0.40 hp) of microwave power.[27] He planned to have the device ready to use in space by May 2009, and was considering making the resonant cavity a superconductor.[27]

Shawyer submitted a theory paper to New Scientist, a weekly popular science consumer magazine,[29] and the EmDrive was featured on the cover of the 8 September 2006 issue of the magazine. The article portrayed the device as plausible, and emphasized the arguments of those who held that point of view.

Science fiction author Greg Egan distributed a public letter stating that "a sensationalist bent and a lack of basic knowledge by its writers" made the magazine's coverage unreliable, sufficient "to constitute a real threat to the public understanding of science". In particular, Egan found himself "gobsmacked by the level of scientific illiteracy" in the magazine's coverage of the EmDrive, stating that New Scientist employed "meaningless double-talk" to obfuscate the relation of Shawyer's proposed space drive to the principle of conservation of momentum. Egan urged those reading his letter to write to New Scientist and pressure the magazine to raise its standards, instead of "squandering the opportunity that the magazine's circulation and prestige provides" for genuine science education. The letter was endorsed by mathematical physicist John C. Baez and posted on his blog.[30][31]

Egan also recommended[30] that New Scientist publish a refutation penned by John P. Costella (a data scientist with a PhD in theoretical physics)[32] of Shawyer's paper.[29]

The following month, the New Scientist editor addressed the ensuing controversy over the article:

"We should have made more explicit where it apparently contravenes the laws of nature and reported that several physicists declined to comment on the device because they thought it too contentious."[33]

Later work

In 2013[34] and 2014,[35] Shawyer presented ideas for 'second-generation' EmDrive designs and applications, at the annual International Astronautical Congress. A paper based on his 2014 presentation was published in Acta Astronautica in 2015.[36] It describes a model for a superconducting resonant cavity, and three models for thrusters with multiple cavities, with hypothetical applications for launching space probes.

Cannae and other drives

The Cannae Drive (formerly Q-drive),[37] another engine designed to generate propulsion from a resonant cavity without propellant, is another widely known implementation of this idea. Its cavity is also asymmetric, but is flatter than that of the EmDrive. It was designed by Fetta in 2006 and has been promoted within the US through his company, Cannae LLC, since 2011.[37][38][39][40] Shawyer has said the Cannae drive "operates along similar lines to EmDrive, except that its thrust is derived from a reduced reflection coefficient at one end plate," which he says would reduce its thrust.[9]

Researchers working under Juan Yang (杨涓) at the Northwestern Polytechnical University (NWPU) in Xi'an developed their own prototype EmDrive in 2008, publishing a report in their university's journal on the theory behind such devices. In 2012-2014 they reported measuring net thrust in a series of tests.[5][12][14][15][16] They made it clear that their work was still preliminary.

Replication efforts

In 2014 and 2015, a NASA research group at Johnson Space Center tested models of both the EmDrive and Cannae drive. They reported observing a small net thrust from both, at low power levels. There were two controls, the first, referred to as the 'null test article', was designed without the internal slotting that the Cannae Drive's creator theorised was necessary to produce thrust. This 'null test article' produced thrust, contrary to theoretical predictions, leading researchers to conclude that "thrust production was not dependent upon slotting". The second control device was built with the same RF load as all the previous devices but had no tapered cavity and did not produce any thrust, leading researchers to conclude that a tapered cavity is necessary for thrust production.[9][11] A research group at the Dresden University of Technology also tested a small EmDrive in a hard vacuum and reported predicted as well as unexpected thrusts.[10][13]

Theory

These drives use a magnetron to produce microwaves which are directed into a metallic, fully enclosed conically tapered high Q resonant cavity. They have a greater area at one end of the device, and a dielectric resonator in front of the narrower end. They are designed to generate a directional thrust toward the narrow end of the cavity and require an electrical power source to run the magnetron, but no other propellant.

Any apparently reactionless drive is treated with skepticism by the physics community, since a truly reactionless drive would violate the law of conservation of momentum. However, proponents claim these drives are not reactionless, and do not violate conservation of momentum.[23] Shawyer has self-published theory papers about the EmDrive.[41] These include the fundamental assertion underlying the theory: "[t]his force difference is supported by inspection of the classical Lorentz force equation F = q(E + νB). (1) If ν is replaced with the group velocity νg of the electromagnetic wave, then equation 1 illustrates that if vg1 is greater than vg2, then Fg1 should be expected to be greater than Fg2." This statement makes two assumptions which Shawyer does not substantiate and which may explain the discrepancy between Shawyer's predictions and those of conventional physics. For example he assumes that radiation pressure is the result of the Lorentz force acting on charged particles in the reflecting material. This is analyzed by Rothman and Boughn[42] who point out that the standard theory of radiation pressure is more complicated than the simplified analysis suggests.

Various hypotheses and theories have been proposed explaining the underlying physics for how these drives might be producing thrust. Shawyer claims that thrust is caused by a radiation pressure imbalance between the two faces of the cavity caused by the action of group velocity in different frames of reference within the framework of special relativity.[43] Yang from NWPU calculated the net force/thrust using classical electromagnetism.[15] Harold G. "Sonny" White, who investigates field propulsion at Eagleworks, NASA's Advanced Propulsion Physics Laboratory, speculated that such resonant cavities may operate by creating a virtual plasma toroid that could realize net thrust using magnetohydrodynamic forces acting upon quantum vacuum fluctuations.[44] Likewise, the paper describing the Eagleworks tests refer to a possible interaction with a so-called "quantum vacuum virtual plasma".[11] This reference has been criticized by mathematical physicists John Baez and Sean M. Carroll because in the standard description of vacuum fluctuations, virtual particles do not behave as a plasma.[31][45][46] A recent paper shows that the EmDrive's thrust can be predicted using a quantization of inertia (MiHsC) [47]

Testing and replication claims

Static thrust tests

Shawyer has reported seven independent positive reviews from experts at BAE Systems, EADS Astrium, Siemens and the IEE.[25]

Fetta tested a superconducting version of the Cannae drive on 13 January 2011. The RF resonant cavity was suspended inside a liquid helium-filled dewar. The weight of the cavity was monitored by load cells. Fetta theorized that when the device was activated and produced upward thrust, the load cells would detect the thrust as change in weight. When the drive was energized by sending 10.5 watt power pulses of RF power into the resonant cavity, there was a reduction in compressive force on the load cells consistent with thrust of 8-10 mN.

None of the above results have been published in the scientific literature. They have been posted on their inventors' websites.[48]

An article published by Shawyer in Acta Astronautica summarises the existing tests on the EmDrive. Of seven tests, four produced a measured force in the intended direction, and three produced thrust in the opposite direction. Furthermore, in one of the tests, thrust could be produced in either direction by varying the spring constants in the measuring apparatus. Shawyer argues that the thrust measured in the opposite direction is the reaction force from the drive, and therefore it is consistent with Newtonian mechanics.[1]

As of 2015, no EmDrive has been tested in microgravity.

Chinese Northwestern Polytechnical University (NWPU)

In 2008 a team of Chinese researchers led by Juan Yang (杨涓), professor of propulsion theory and engineering of aeronautics and astronautics at NWPU, claimed to have developed a valid electro-magnetic theory behind a microwave resonant cavity thruster.[8][49] A demonstration version of the drive was built and tested with different cavity shapes and at higher power levels in 2010.[12] A maximum thrust of 720 mN was reported at 2,500 W of input power-roughly 0.3 mN/W. This was observed on an aerospace engine test stand usually used to precisely test spacecraft engines like ion drives.[6][14][15][16][50] As of 2015, this is by far the most significant test of such a device to date.

The editor of Wired magazine who covered these experimental results reported that he received comments from the Chinese researchers stating "the publicity was very unwelcome, especially any suggestion that there might be a military application"[7] and that Yang told him that "she is not able to discuss her work until more results are published".[6]

NASA/JSC Advanced Propulsion Physics Laboratory (Eagleworks)

White's team at Eagleworks is devoted to studying advanced propulsion systems that they hope to develop using quantum vacuum and spacetime engineering.[51] The group has investigated a wide range of untested and fringe proposals, including RF resonant cavity thrusters and related concepts.

EmDrive

In 2011, the group reported having an RF resonant cavity thruster prototype for testing.

In July 2014, the group reported positive results for an evaluation of a RF resonant tapered cavity similar to the EmDrive.[11] Testing was performed using a low-thrust torsion pendulum capable of detecting force at the micronewton level within a sealed but not evacuated vacuum chamber; the RF power amplifier used an electrolytic capacitor not capable of operating in a hard vacuum.[11] The experimenters recorded directional thrust immediately upon application of power.

NASA's first tests of this tapered RF resonant cavity were conducted at very low power (2% of Shawyer's 2002 experiment and 0.7% of the Chinese 2010 experiment), but a net mean thrust over five runs was measured at 91.2 µN at 17 W of input power. A net peak thrust was recorded at 116 µN at the same power level.[11] The experiment was criticized for not having been conducted under vacuum, which would have eliminated thermal air currents.

Six months later, early 2015, Paul March from Eagleworks made new results public, claiming positive experimental force measurements with a torsional pendulum in a hard vacuum: about 50 µN with 50 W of input power at 5.0×10−6 torr, and new null-thrust tests.[52] The new RF power amplifiers were said to be made for hard vacuum, but still fail rapidly due to internal corona discharges, with not enough funding to replace or upgrade them, so measurements are still scarce and need improvement before a new report can be published.[53]

Glenn Research Center offered to replicate the experiment in a hard vacuum when Eagleworks manage to reach 100 µN of thrust, because the GRC thrust stand can only measure to 50 µN.[52]

Eagleworks later announced a plan to upgrade their equipment to higher power levels, use vacuum-capable RF amplifiers with power ranges of up to 125 W, and to design a new tapered cavity analytically determined to be in the 0.1 N/kW range. The test article will be subjected to independent verification and validation at Glenn Research Center, the Jet Propulsion Laboratory, and the Johns Hopkins University Applied Physics Laboratory.[11]

Cannae drive

The same NASA test campaign evaluated a Cannae drive.[11] They tested two versions: one device with radial slots engraved along the bottom rim of the resonant cavity interior, as required by Fetta's theory to produce thrust;[38] and a "null" test article lacking those radial slots. Both drives were equipped with an internal dielectric.[11] The null test device was not intended to be the experimental control. The control device was a third test article involving an RF load but without the resonant cavity interior. Like the EmDrive tests, the Cannae drive tests took place at atmospheric pressure, not in a vacuum.

About the same net thrust was reported for both the device with radial slots and the null test device without slots. The experimental control without a resonant cavity interior measured zero thrust, as expected. Some considered the positive result for the non-slotted device a possible flaw in the experiment, as the null test device had been expected to produce less or no thrust based upon Fetta's theory of how thrust was produced by the device.[54][31][55] In the complete paper, however, Eagleworks concluded that the test results proved that "thrust production was not dependent upon slotting".[11]

Dresden University of Technology

Martin Tajmar leads a research group in advanced space propulsion systems at the Institute for Aerospace Engineering, Dresden University of Technology (TUD).

In July 2015 he reported results for an evaluation of an RF resonant tapered cavity similar to the EmDrive.[13] Testing was performed first on a knife-edge beam balance capable of detecting force at the micronewton level, on top of an anti-vibration granite table at ambient air pressure; then on a torsion pendulum with a force resolution of a tenth of a micronewton, inside a vacuum chamber at ambient air pressure and in a hard vacuum at 4×10−6 mbar (3×10−6 torr).

Tajmar used a conventional 2.45 GHz 700 W oven magnetron and attached it through a standard waveguide to a copper frustum cavity, which had distinctive features among other third-party replication experiments. The cavity was comparatively much smaller, with a height of only 68.6 mm; the entrance slit on the side for microwaves filled almost all that height; and the Q factor was considerably lower. (Q < 50 in ambient air and later Q = 20 in vacuum tests after some oxidization of inner surfaces. The best resonance at that size would have been above 3 GHz, a frequency the magnetron used by Tajmar could not achieve.)

Significant side-effects like air convection currents and buoyancy due to heat dissipated from the cavity and the magnetron were detected and taken into account by thermal insulation with glass wool for ambient-air tests. Electromagnetic interference was also shielded with high magnetic permeability iron sheets.

The device produced positive thrusts in the positive direction and negative thrusts in the negative direction of about 20 micronewtons in a hard vacuum, consistent with the low Q factor.

Besides being tested horizontally in both directions on the torsion pendulum, the cavity was also set upwards as a "null" configuration. However, this vertical test intended to be the experimental control showed an anomalous thrust of hundreds of micronewtons that could be caused by a magnetic interaction with the power feeding lines going to and from liquid metal contacts in the setup.

This anomalous interaction was not fully understood. As a result, the authors conclude they can not confirm or refute claims about such a thruster, and they recommend further investigation. They plan future experiments with better magnetic shielding, other vacuum tests and improved cavities with higher Q factors to increase thrust.

Eric W. Davis, a physicist at the Institute for Advanced Studies at Austin, noted "The experiment is quite detailed but no theoretical account for momentum violation is given by Tajmar, which will cause peer reviews and technical journal editors to reject his paper should it be submitted to any of the peer-review physics and aerospace journals."[56]

See also

Notes

References

  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 5.2 Lua error in package.lua at line 80: module 'strict' not found.
  6. 6.0 6.1 6.2 6.3 6.4 Lua error in package.lua at line 80: module 'strict' not found.
  7. 7.0 7.1 7.2 Lua error in package.lua at line 80: module 'strict' not found.
  8. 8.0 8.1 Lua error in package.lua at line 80: module 'strict' not found.
  9. 9.0 9.1 9.2 Lua error in package.lua at line 80: module 'strict' not found.
  10. 10.0 10.1 Lua error in package.lua at line 80: module 'strict' not found.
  11. 11.00 11.01 11.02 11.03 11.04 11.05 11.06 11.07 11.08 11.09 11.10 Lua error in package.lua at line 80: module 'strict' not found.
  12. 12.0 12.1 12.2 Lua error in package.lua at line 80: module 'strict' not found.
  13. 13.0 13.1 13.2 Lua error in package.lua at line 80: module 'strict' not found.
  14. 14.0 14.1 14.2 Lua error in package.lua at line 80: module 'strict' not found.
  15. 15.0 15.1 15.2 15.3 Lua error in package.lua at line 80: module 'strict' not found.
  16. 16.0 16.1 16.2 Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.
  19. Lua error in package.lua at line 80: module 'strict' not found.
  20. Lua error in package.lua at line 80: module 'strict' not found.
  21. Lua error in package.lua at line 80: module 'strict' not found.
  22. Lua error in package.lua at line 80: module 'strict' not found.
  23. 23.0 23.1 Lua error in package.lua at line 80: module 'strict' not found.
  24. Lua error in package.lua at line 80: module 'strict' not found.
  25. 25.0 25.1 Lua error in package.lua at line 80: module 'strict' not found.
  26. Lua error in package.lua at line 80: module 'strict' not found.
  27. 27.0 27.1 27.2 Lua error in package.lua at line 80: module 'strict' not found.
  28. Lua error in package.lua at line 80: module 'strict' not found.
  29. 29.0 29.1 Lua error in package.lua at line 80: module 'strict' not found.
  30. 30.0 30.1 Lua error in package.lua at line 80: module 'strict' not found.
  31. 31.0 31.1 31.2 Lua error in package.lua at line 80: module 'strict' not found.
  32. Lua error in package.lua at line 80: module 'strict' not found.
  33. Lua error in package.lua at line 80: module 'strict' not found.
  34. Lua error in package.lua at line 80: module 'strict' not found.
  35. Lua error in package.lua at line 80: module 'strict' not found.
  36. Lua error in package.lua at line 80: module 'strict' not found.
  37. 37.0 37.1 WO application 2007089284, Fetta, Guido Paul, "Resonating cavity propulsion system", published 2007-11-15, assigned to Fetta, Guido Paul 
  38. 38.0 38.1 Lua error in package.lua at line 80: module 'strict' not found.
  39. US application 2014013724, Fetta, Guido P., "Electromagnetic thruster", published 2014-01-16, assigned to Cannae LLC 
  40. Lua error in package.lua at line 80: module 'strict' not found.
  41. Lua error in package.lua at line 80: module 'strict' not found.
  42. Lua error in package.lua at line 80: module 'strict' not found.
  43. Lua error in package.lua at line 80: module 'strict' not found.
  44. Lua error in package.lua at line 80: module 'strict' not found.
  45. Lua error in package.lua at line 80: module 'strict' not found.
  46. Lua error in package.lua at line 80: module 'strict' not found.
  47. Lua error in package.lua at line 80: module 'strict' not found.
  48. Page is no longer available, but an archived version as of 2 November 2012 is available at archive.org: www.cannae.com/proof-of-concept/experimental-results (retrieved 11 February 2015)
  49. Lua error in package.lua at line 80: module 'strict' not found.
  50. Lua error in package.lua at line 80: module 'strict' not found.
  51. Lua error in package.lua at line 80: module 'strict' not found.
  52. 52.0 52.1 Lua error in package.lua at line 80: module 'strict' not found.
  53. Lua error in package.lua at line 80: module 'strict' not found.
  54. Lua error in package.lua at line 80: module 'strict' not found.
  55. Lua error in package.lua at line 80: module 'strict' not found.
  56. Lua error in package.lua at line 80: module 'strict' not found.