Site-specific recombination

Site-specific recombination, also known as conservative site-specific recombination, is a type of genetic recombination in which DNA strand exchange takes place between segments possessing at least a certain degree of sequence homology. Site-specific recombinases (SSRs) perform rearrangements of DNA segments by recognizing and binding to short DNA sequences (sites), at which they cleave the DNA backbone, exchange the two DNA helices involved and rejoin the DNA strands. While in some site-specific recombination systems just a recombinase enzyme and the recombination sites is enough to perform all these reactions, in other systems a number of accessory proteins and/or accessory sites are also needed. Multiple genome modification strategies, among these recombinase-mediated cassette exchange (RMCE), an advanced approach for the targeted introduction of transcription units into predetermined genomic loci, rely on the capacities of SSRs.

Site-specific recombination systems are highly specific, fast and efficient, even when faced with complex eukaryotic genomes. They are employed in a variety of cellular processes, including bacterial genome replication, differentiation and pathogenesis, and movement of mobile genetic elements (Nash 1996). For the same reasons, they present a potential basis for the development of genetic engineering tools.

Recombination sites are typically between 30 and 200 nucleotides in length and consist of two motifs with a partial inverted-repeat symmetry, to which the recombinase binds, and which flank a central crossover sequence at which the recombination takes place. The pairs of sites between which the recombination occurs are usually identical, but there are exceptions (e.g. attP and attB of λ integrase, see lambda phage).

Classification: tyrosine- vs. serine- recombinases

File:STswap.png

Figure 1:Tyr-Recombinases: Details of the crossover step Top: Traditional view including strand-exchange followed by branch-migration (proofreading). The mechanism occurs in the framework of a synaptic complex (1) including both DNA-sites in parallel orientation. While branch-migration explains the specific homology requirements and the reversibility of the process in a straightforward manner, it could not be reconciled with the motions recombinase subunits have to undergo in three dimensions. Bottom: Current view. Two simultaneous strand-swaps, each depending on the complementarity of three successive bases at (or close to) the edges of the 8 bp spacer (dashed lines indicate base-pairing). Didactic complications arise from the fact that, in this model, the synaptic complex must accommodate both substrates in an anti-parallel orientation. This synaptic complex (1) arises from the association of two individual recombinase subunits ("protomers"; gray ovals) with the respective target site. Its formation depends on inter-protomer contacts and DNA bending, which in turn define the subunits (green) with an active role during the first crossover reaction. Both representations illustrate only one half of the respective pathway. These parts are separated by a Holliday-junction/isomerization step before the product (3) can be released

File:SUrot.png

Figure 2: Ser-Recombinases: The (essentially irreversible) subunit-rotation pathway. Contrary to Tyr-recombinases, the four participating DNA-strands are cut in synchrony at points staggered by only 2 bp (leaving little room for proofreading). Subunit-rotation (180°) permits the exchange of strands while covalently linked to the protein partner. The intermediate exposure of double-strand breaks bears risks of triggering illegitimate recombination and thereby secondary reactions. Here, the synaptic complex arises from the association of pre-formed recombinase dimers with the respective target sites (CTD/NTD, C-/N-terminal domain). Like for Tyr-recombinases, each site contains two arms, each accommodating one protomer. As both arms are structured slightly differently, the subunits become conformationally tuned and thereby prepared for their respective role in the recombination cycle. Contrary to members of the Tyr-class the recombination pathway converts two different substrate sites (attP and attB) to site-hybrids (attL and attR). This explains the irreversible nature of this particular recombination pathway, which can only be overcome by auxiliary "recombination directionality factors" (RDFs).

Based on amino acid sequence homology and mechanistic relatedness most site-specific recombinases are grouped into one of two families: the tyrosine recombinase family or the serine recombinase family. The names stem from the conserved nucleophilic amino acid residue that they use to attack the DNA and which becomes covalently linked to it during strand exchange. Early members of the serine recombinase family were known as resolvase/invertases, while the founding member of the tyrosine recombinases, lambda- integrase, using attP/B recognition sites) differs from the now well known enzymes such as Cre (from the P1 phage) and FLP (from yeast S. cerevisiae) while famous serine recombinases include enzymes such as: gamma-delta resolvase (from the Tn1000 transposon), Tn3 resolvase (from the Tn3 transposon) and φC31 integrase (from the φC31 phage).

Although the individual members of the two recombinase families can perform reactions with same practical outcomes, the two families are unrelated to each other, having different protein structures and reaction mechanisms. Unlike tyrosine recombinases, serine recombinases are highly modular as was first hinted by biochemical studies, and later shown by crystallographic structures. Knowledge of these protein structures could prove useful when attempting to reengineer recombinase proteins as tools for genetic manipulation.

Mechanism

Recombination between two DNA sites begins by the recognition and binding of these sites by the recombinase protein. This is followed by synapsis, i.e. bringing the sites together to form the synaptic complex. It is within this synaptic complex that the strand exchange takes place, as the DNA is cleaved and rejoined by controlled transesterification reactions. During strand exchange, the DNA cut at fixed points within the crossover region of the site releases a deoxyribose hydroxyl group, while the recombinase protein forms a transient covalent bond to a DNA backbone phosphate. This phosphodiester bond between the hydroxyl group of the nucleophilic serine or tyrosine residue conserves the energy that was expended in cleaving the DNA. Energy stored in this bond is subsequently used for the rejoining of the DNA to the corresponding deoxyribose hydroxyl group on the other site. The entire process therefore goes through without the need for external energy-rich cofactors such as ATP.

Although the basic chemical reaction is the same for both tyrosine and serine recombinases, there are marked differences. Tyrosine recombinases, such as Cre or Flp, cleave one DNA strand at a time at points that are staggered by 6-8bp, linking the 3’ end of the strand to the hydroxyl group of the tyrosine nucleophile (Fig. 1). Strand exchange then proceeds via a crossed strand intermediate analogous to the Holliday junction in which only one pair of strands has been exchanged.

The mechanism and control of serine recombinases is much less well understood. This group of enzymes was only discovered in the mid-1990s and is still relatively small. The now classical members gamma-delta and Tn3 resolvase, but also new additions like φC31-, Bxb1-, and R4 integrases, cut all four DNA strands simultaneously at points that are staggered by 2bp (Fig. 2). During cleavage, a protein-DNA bond is formed via a transesterification reaction in which a phosphodiester bond is replaced by a phosphoserine bond between a 5’ phosphate at the cleavage site and the hydroxyl group of the conserved serine residue (S10 in resolvase).

It is still not entirely clear how the strand exchange occurs after the DNA has been cleaved. However, it has been shown that the strands are exchanged while covalently linked to the protein, with a resulting net rotation of 180°. The most quoted (but not the only) model accounting for these facts is the "subunit rotation model" (Fig. 2). Independent of the model, DNA duplexes are situated outside of the protein complex, and large movement of the protein is needed to achieve the strand exchange. In this case the recombination sites are slightly asymmetric, which allows the enzyme to tell apart the left and right ends of the site. When generating products, left ends are always joined to the right ends of their partner sites, and vice versa. This causes different recombination hybrid sites to be reconstituted in the recombination products. Joining of left ends to left or right to right is avoided due to the asymmetric “overlap” sequence between the staggered points of top and bottom strand exchange, which is in stark contrast to the mechanism employed by tyrosine recombinases.

File:Cre-lox insertion excision.svg

Figure 3A: Reversible insertion and excision by the Cre-lox system

File:Cre-lox inversion.svg

Figure 3B: Inversion by the Cre-lox system

The reaction catalysed, for instance, by Cre-recombinase may lead to excision of the DNA segment flanked by the two sites (Fig. 3A), but may also lead to integration or inversion of the orientation of the flanked DNA segment (Fig. 3B). What the outcome of the reaction will be is dictated mainly by the relative location and the orientation of sites that are to be recombined, but also by the innate specificity of the site-specific system in question. Excisions and inversions occur if the recombination takes place between two sites that are found on the same molecule (intramolecular recombination), and if the sites are in the same (direct repeat) or in an opposite orientation (inverted repeat), respectively. Insertions, on the other hand, take place if the recombination occurs on sites that are situated on two different DNA molecules (intermolecular recombination), provided that at least one of these molecules is circular. Most site-specific systems are highly specialised, catalysing only one of these different types of reaction, and have evolved to ignore the sites that are in the ‘wrong’ orientation.

See also

• Site-specific recombinase technology
• Recombinase-mediated cassette exchange
• Cre recombinase
• Cre-Lox recombination
• FLP-FRT recombination
• Genetic recombination
• Homologous recombination