University Medical Center (UTA station)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
University Medical Center
Utah Transit Authority (UTA)
TRAX light rail station
File:Red line Trax at University Medical Center II.jpg
Red Line train at University Medical Center
Location 10 North Mario Capecchi Drive
Salt Lake City, Utah[1]
 United States
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Owned by UTA
Line(s) Utah Transit Authority (UTA): Lua error in package.lua at line 80: module 'strict' not found.
Platforms 2 side platforms
Connections UTA inter-county local bus
PC-SLC Connect
Construction
Structure type At-grade
Parking Limited[1]
Disabled access Yes
History
Opened 29 September 2003[2]
Services
Preceding station   Utah Transit Authority   Following station
Terminus Red Line
  Former services  
Terminus Sandy/University Line
University Line Terminus

University Medical Center is a light rail station on the campus of the University of Utah in Salt Lake City, Utah, in the United States, served by the Red Line of the Utah Transit Authority's (UTA) TRAX light rail system. The Red Line provides service from this station (near the University of Utah Medical Center) to the Daybreak Community of South Jordan.

Description

The station is located on the campus of the University of Utah at 10 North Mario Capecchi Drive (formerly called Medical Drive),[Note 1] with both side platforms situated on the west side of the street. The station provides service for the nearby medical facilities, including the University of Utah Hospital, Primary Children's Medical Center, the Huntsman Cancer Institute, and the Moran Eye Center. Unlike many TRAX stations, University Medical Center does not have a Park and Ride lot, however, UTA indicates that there is "limited parking" available.[1] The station is part of a railway right of way that was created specifically for the former University Line. The station opened on 29 September 2003[2] and is operated by the Utah Transit Authority.

All of UTA's TRAX and FrontRunner trains and stations, streetcars and streetcar stops, and all fixed route buses are compliant with Americans with Disabilities Act and are therefore accessible to those with disabilities.[4] Signage at the stations, on the passenger platforms, and on the trains clearly indicate accessibility options. In accordance with the Utah Clean Air Act and UTA ordinance, "smoking is prohibited on UTA vehicles as well as UTA bus stops, TRAX stations, and FrontRunner stations".[5]

Train schedule[Note 2]

On weekdays the first (southbound) train (to the Daybreak Parkway Station) leaves the University Medical Center Station at about 5:30 am and the last train leaves at 11:30 pm. However, the last train only goes as far south as the Central Pointe Station; the last train to the Daybreak Parkway Station leaves at 11:00 pm.

On Saturdays the first (southbound) train leaves at about 7:00 am and the last southbound train leaves at 11:37 pm. However, the last southbound train only goes as far south as the Central Pointe Station; the last southbound train to the Daybreak Parkway Station leaves at 10:17 pm.

On Sundays the first (southbound) train leaves at about 10:00 am and the last southbound train leaves at 8:17 pm. However, the last southbound train only goes as far south as the Central Pointe Station; the last southbound train to the Daybreak Parkway Station leaves at 6:57 pm.

Red Line trains run every fifteen minutes on weekdays and every twenty minutes on weekends.[6][7]

Bus connections[Note 3]

Notes

  1. Although (as of August 2014) UTA still lists the address of the station as 10 North Medical Drive,[1] that portion of Medical Drive, as well as the nearby Wasatch Drive, was renamed and re-signed as Mario Capecchi Drive in February 2008.[3]
  2. Train schedules are current as of Change Day, 17 August 2014
  3. Bus routes are current as of Change Day, 17 August 2014

References

  1. 1.0 1.1 1.2 1.3 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.

External links