Gordon Power Station
Gordon Dam | |
---|---|
File:Francis Turbine Shaft and Bearings.jpg
Shaft connecting the third turbine to the rotor. The bearing at the top supports the load of the shaft and turbine, the bottom bearing is primarily for alignment.
|
|
Location of the Gordon Dam in Tasmania
|
|
Country | Australia |
Location | South West Tasmania |
Coordinates | Lua error in package.lua at line 80: module 'strict' not found. |
Purpose | Power |
Status | Operational |
Construction began | 1974 |
Opening date | 1978 |
Owner(s) | Hydro Tasmania |
Dam and spillways | |
Type of dam | Arch dam |
Impounds | Gordon River |
Height | 140 m (459 ft) |
Length | 198 m (650 ft) |
Width (crest) | 2.75 m (9 ft) |
Width (base) | 17.7 m (58 ft) |
Dam volume | 154×10 3 m3 (5×10 6 cu ft) |
Spillway type | Controlled |
Spillway capacity | 175 m3/s (6,180 cu ft/s) |
Reservoir | |
Creates | Lake Gordon |
Total capacity | 12.4 km3 (3.0 cu mi) |
Catchment area | 1,280 km2 (494 sq mi) |
Surface area | 278 km2 (107 sq mi) |
Power station | |
Name | Gordon Power Station |
Coordinates | Lua error in package.lua at line 80: module 'strict' not found. |
Operator(s) | Hydro Tasmania |
Commission date | 1978; 1988 |
Type | Conventional |
Turbines | 3 Fuji x 144 MW (193,107 hp) |
Installed capacity | 432 to 450 MW (579,322 to 603,460 hp) |
Capacity factor | 0.9 |
Annual generation | 1,388 GWh (4,997 TJ) |
Website hydro |
|
[1] |
The Gordon Power Station is the largest conventional hydroelectric power station in Tasmania, Australia; located in the South West region of the state. The power station is situated on the Gordon River. Water from the Lake Gordon descends 183 metres (600 ft) underground into the power station.
Technical data
The Gordon Power Station system comprises three 144-megawatt (193,000 hp) Francis-type turbines that have a combined generating capacity of 432 megawatts (579,000 hp) of electricity,[2] covering about 13% of the electricity demand of Tasmania.[3] The first two turbines were commissioned in 1978, before the third was commissioned a decade later in 1988.[4]
The power station is fuelled by water from Lake Gordon. Water from Lake Pedder is also drawn into Lake Gordon through the McPartlans Pass Canal.
The station output is fed from each machine by 18 kV aluminium busbars to the surface switchyard then passes through three 18/220 kV power transformers and 220 kV outdoor switchgear to TasNetworks' transmission grid. The switchyard also houses 22 kV apparatus used for power supply to the station and to the local community.[2] The annual output is estimated to be 1,388 gigawatt-hours (5,000 TJ).[1]
Gallery
-
Gordon Power Station Stator and Rotor.jpg
Stator and rotor for second turbine. The clear port in the foreground allows the view of bearing lubricant.
See also
<templatestyles src="Stack/styles.css"/>
References
External links
- Hydro Tasmania page on the Gordon - Pedder
- Pages with broken file links
- Use Australian English from June 2015
- All Wikipedia articles written in Australian English
- Use dmy dates from June 2015
- Use Australian English from April 2014
- Use dmy dates from April 2014
- Energy infrastructure completed in 1978
- Energy infrastructure completed in 1988
- Hydroelectric power stations in Tasmania
- South West Tasmania