Morris Commercial Cars
Morris Commercial Cars Limited was a British manufacturer of commercial vehicles formed by William Morris, founder of Morris Motors Limited, to continue the business of E G Wrigley and Company which he purchased as of 1 January 1924.
Contents
History
Morris bought the assets of Soho, Birmingham axle manufacturer E.G. Wrigley and Company after it was placed in liquidation late in 1923. Up until that point a small number of commercial vehicle variants of Morris cars were built at the Morris plant at Cowley, but with the newly acquired plant in Foundry Lane, Soho, Birmingham serious production began.
In 1932 the business was moved a few miles across Birmingham to the former Wolseley factory in Adderley Park.
In 1936 Morris sold the company into his Morris Motors Limited.[1][2] The use of the Morris Commercial brand name continued until 1968[2] when British Motor Holdings, by then the parent of Austin as well as Morris, merged with the Leyland Motor Corporation to form the British Leyland Motor Corporation.
In wartime commercial vehicles in the Morris range were produced for military use – such as the Morris C8 and Morris Commercial also built vehicles such as the Terrapin amphibious carrier
During the 1960s the light trucks and forward-control J4 light vans produced by Austin and Morris commercial were identical.[3]
While production of the light vans remained concentrated on the Birmingham Adderley Park site, production of the F-series and W-series light trucks moved to Scotland with the opening in 1960 of the company's Bathgate plant.[3] The Adderley Park plant was closed in 1971 and demolished shortly afterwards.[2]
The light trucks in the 1960s included the FF, a forward-control design introduced in 1958, along with the WF which was a sibling vehicle with the driver placed behind the engine rather than on top of it. The updated version of the FF, the FJ, appeared in 1964; it featured a split-circuit braking system, a novelty in this class of vehicle.[3] The FF remained in production and the two vehicles were offered side by side: in this class the BMC trucks were nevertheless out-competed in terms of domestic market sales volumes by Bedford and Ford (with their Thames).[3] Austin/Morris commercial vehicles in the 1960s also included the Austin/Morris FG-series an unusual-looking urban delivery truck with driver doors set at an angle at the rear corners of the cab to permit access in confined spaces.[3]
Taxicabs
A new brand of London taxicab was announced on 9 February 1929. Built in accordance with New Scotland Yard regulations the new Morris-Commercial International taxicab was up to date and convenient in detail. Safety glass was fitted throughout, upholstery was real hide, a passenger need only press a button and speak in an ordinary voice and a microphone would communicate it to the driver. The cab's overall dimensions were 13ft 6in, 5ft 8in and 7ft 2in high.[4]
The 4-cylinder engine, single dry plate clutch and four-speed gearbox were a unit like that on the standard 30cwt Morris-Commercial vehicle. Four wheel brakes would have been better, reported The Times but the rear brakes supplied were efficient, the steel artillery wheels detachable. The average turning circle was 24ft 9in, wheel base and track measured 9ft and 4ft 8in respectively.[4]
Carrying four passengers the taxicab had "plenty of speed" and four forward gears and was suitable for the country as well as London. The engine's four cylinders had a bore and stroke of 80 and 125 mm giving a displacement of 2,513 cc (153 cu in) and a tax rating of 15.87 h.p. The engine had side valves with tappets easily reached for adjustment, the generator and magneto being driven in tandem. The cooling water circulated naturally. Such parts as the carburettor were easily accessible. The speed lever worked in a visible gate with a stop for reverse. The three-quarter floating back axle was driven by overhead worm gear from an enclosed propellor shaft. The springs were semi-elliptical and beneath the frame, those in front were flat and splayed while those at the back were underhung. Shock absorbers were provided. The chassis weighed 18 cwt 2,016 lb (914 kg).[5]
These vehicles were succeeded by Nuffield Oxford Taxis
Vehicles
Notes
- ↑ Morris Motors Limited, Notice issued in compliance with ... The Times, Tuesday, 13 October 1936; p. 22; Issue 47504.
- ↑ 2.0 2.1 2.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 3.0 3.1 3.2 3.3 3.4 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 4.0 4.1 Motor Transport, The Times, Saturday, 9 February 1929; p. 6; Issue 45123.
- ↑ Motor Transport Show. The Times, Tuesday, 12 November 1929; p. 21; Issue 45358
External links
 |
Wikimedia Commons has media related to Morris Commercial Cars. |
.jpg){kind=link}
_reg_MM_9465.jpg){kind=link}
_-_geograph.org.uk_-_1709496.jpg){kind=link}
