Pollupalai and Vallimunai Wind Farms

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Pollupalai and Vallimunai Wind Farms
Pollupalai and Vallimunai Wind Farms is located in Sri Lanka
Pollupalai and Vallimunai Wind Farms
Location of Pollupalai and Vallimunai Wind Farms in Sri Lanka
Country Sri Lanka
Location Pachchilaipalli
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Status Operational
Commission date December 2014
Owner(s) WindForce (Pvt) Ltd
Operator(s) Joule Power (Pvt) Ltd
Beta Power (Pvt) Ltd
Wind farm
Type Onshore
Avg. site elevation Sea level
Hub height 85 m (279 ft)
Rotor diameter 82 m (269 ft)
Rated wind speed 7.5 m/s (25 ft/s)
Power generation
Units operational 16 × 1.5 MW
Make and model ReGen V82
Nameplate capacity 24 MW
Annual generation 60 GWh
Website
www.windforce.lk

The Pollupalai and Vallimunai Wind Farms are two wind farms built together by Joule Power and Beta Power, on the north-eastern shore of the Jaffna Lagoon, in Pachchilaipalli, Sri Lanka. Both wind farms are owned by the parent company Windforce, and have an installed capacity of 12 megawatts each,[1][2] and an annual production of approximately 60 GWh. The wind farms are the first-ever to be constructed in the Northern Province of Sri Lanka.[3]

Wind turbines

Both wind farms utilizes a total of sixteen ReGen V82 wind turbines, which has an installed capacity of 1.5 MW per turbine. The turbines operate at 9–17.3 RPM, and has a rotor diameter of 82 m (269 ft) and a swept area of 5,325 m2 (57,318 sq ft). The tubular tower section has a hub height of 85 m (279 ft), and is made up of four sections.[4]

The wind turbine's operating wind speed is 12.5 m/s (41 ft/s), with cut-in and cut-out wind speeds of 3 m/s (9.8 ft/s) and 22 m/s (72 ft/s) respectively. The turbines can survive wind speeds of up to 52.5 m/s (172 ft/s).[4] All 16 turbines are placed 400 m (1,300 ft) apart in a single row, facing the lagoon. The site's average wind speed is 7.5 m/s (25 ft/s), with an air density of 1.18 kg/m3 (0.074 lb/cu ft).[4]

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 4.2 Lua error in package.lua at line 80: module 'strict' not found.

External links

  • Lua error in package.lua at line 80: module 'strict' not found.