SMPTE 259M
From Infogalactic: the planetary knowledge core
SMPTE 259M is a standard published by SMPTE which "... describes a 10-bit serial digital interface operating at 143/270/360 Mb/s." [1]
The goal of SMPTE 259M is to define a serial digital interface (based on a coaxial cable), called SDI or SD-SDI.
There are 4 bitrates defined, which are normally used to transfer the following standard video formats:
| Variant | Bitrate | Display Aspect Ratio | Total Lines (per Frame) | Active Pixels | Active Lines | Framerate |
|---|---|---|---|---|---|---|
| SMPTE 259M-A | 143 Mbit/s | 4:3 | 525 | 768 | 486 | 59.94i |
| SMPTE 259M-B | 177 Mbit/s | 4:3 | 625 | 948 | 576 | 50i |
| SMPTE 259M-C | 270 Mbit/s | 4:3 or 16:9 | 525 | 720 | 486 | 59.94i |
| SMPTE 259M-C | 270 Mbit/s | 4:3 or 16:9 | 625 | 720 | 576 | 50i |
| SMPTE 259M-D | 360 Mbit/s | 16:9 | 525 | 960 | 486 | 59.94i |
References
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
<templatestyles src="Asbox/styles.css"></templatestyles>
 |
This standards- or measurement-related article is a stub. You can help Wikipedia by expanding it. |
