7 World Trade Center

From Infogalactic: the planetary knowledge core
(Redirected from WTC7)
Jump to: navigation, search
7 World Trade Center
A new skyscraper in New York's World Trade Center
The new 7 World Trade Center from the southeast (2008)
Lua error in Module:Location_map at line 501: Unable to find the specified location map definition. Neither "Module:Location map/data/Lower Manhattan" nor "Template:Location map Lower Manhattan" exists.
Location within Lua error in Module:Location_map at line 59: Unable to find the specified location map definition. Neither "Module:Location map/data/Lower Manhattan#Manhattan#New York City#New York#USA" nor "Template:Location map Lower Manhattan#Manhattan#New York City#New York#USA" exists.
General information
Status Complete
Type Office
Location 250 Greenwich Street
Manhattan, New York 10007, United States
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Construction started May 7, 2002[1]
Completed 2006
Opening May 23, 2006
Height
Architectural 743 ft (226 m)[2]
Roof 741 ft (226 m)[3]
Top floor 679 ft (207 m)[2]
Technical details
Floor count 52[3][4]
Floor area 1,681,118 sq ft (156,181 m2)[2]
Lifts/elevators 29[2]
Design and construction
Architect David Childs (SOM)[2]
Developer Silverstein Properties[2][4]
Structural engineer WSP Cantor Seinuk[2]
Website
7 World Trade Center, wtc.com
References
[2]

7 World Trade Center (7 WTC) refers to two buildings that have existed at the same location in the World Trade Center site in Lower Manhattan, New York City. The current structure is the second building to bear that name and address in the World Trade Center. The original structure, part of the old World Trade Center, was completed in 1987 and was destroyed in the September 11 attacks. The current building opened in 2006. Both buildings were developed by Larry Silverstein, who holds a ground lease for the site from the Port Authority of New York and New Jersey.

The original 7 World Trade Center was 47 stories tall, clad in red masonry, and occupied a trapezoidal footprint. An elevated walkway connected the building to the World Trade Center plaza. The building was situated above a Consolidated Edison power substation, which imposed unique structural design constraints. When the building opened in 1987, Silverstein had difficulties attracting tenants. In 1988, Salomon Brothers signed a long-term lease, and became the main tenants of the building. On September 11, 2001, 7 WTC was damaged by debris when the nearby North Tower of the World Trade Center collapsed. The debris also ignited fires, which continued to burn throughout the afternoon on lower floors of the building. The building's internal fire suppression system lacked water pressure to fight the fires, and the building collapsed completely at 5:21:10 pm, according to FEMA,[5]:23 while the 2008 NIST study placed the final collapse time at 5:20:52 pm.[6]:19, 21, 50–51 The collapse began when a critical internal column buckled and triggered structural failure throughout, which was first visible from the exterior with the crumbling of a rooftop penthouse structure at 5:20:33 pm.

While it is commonly claimed (e.g.,[7]) that the old 7 World Trade Center is only tall building known to have collapsed primarily due to fire, it should be noted that 7 WTC was damaged by debris from the earlier-falling towers. In 2017, the Plasco Building also collapsed during a fire.

Construction of the new 7 World Trade Center began in 2002 and was completed in 2006. The building is 52 stories tall (plus one underground floor), making it the 28th-tallest in New York.[2][3][4] It is built on a smaller footprint than the original, allowing Greenwich Street to be restored from Tribeca through the World Trade Center site and south to Battery Park. The new building is bounded by Greenwich, Vesey, Washington, and Barclay streets. A small park across Greenwich Street occupies space that was part of the original building's footprint. The current building's design emphasizes safety, with a reinforced concrete core, wider stairways, and thicker fireproofing of steel columns. It also incorporates numerous green design features. The building was the first commercial office building in New York City to receive the U.S. Green Building Council's Leadership in Energy and Environmental Design (LEED) certification, where it won a gold rating. It was also one of the first projects accepted to be part of the Council's pilot program for Leadership in Energy and Environmental Design – Core and Shell Development (LEED-CS).[8]

Original building (1987–2001)

Design and layout

Original 7 World Trade Center, the red-tinted building behind and to the left of the Twin Towers (View from southwest)
The original 7 World Trade Center from the WTC observation deck

The original 7 World Trade Center was a 47-story building, designed by Emery Roth & Sons, with a red granite facade. The building was 610 feet (190 m) tall, with a trapezoidal footprint that was 330 ft (100 m) long and 140 ft (43 m) wide.[9][10] Tishman Realty & Construction managed construction of the building, which began in 1983.[9] In May 1987, the building opened, becoming the seventh structure of the World Trade Center.[11]

The building was constructed above a Con Edison substation that had been on the site since 1967.[12] The substation had a caisson foundation designed to carry the weight of a future building of 25 stories containing 600,000 sq ft (56,000 m2).[13] The final design for 7 World Trade Center was for a much larger building than originally planned when the substation was built.[14]:xxxviii The structural design of 7 World Trade Center therefore included a system of gravity column transfer trusses and girders, located between floors 5 and 7, to transfer loads to the smaller foundation.[6]:5 Existing caissons installed in 1967 were used, along with new ones, to accommodate the building. The 5th floor functioned as a structural diaphragm, providing lateral stability and distribution of loads between the new and old caissons. Above the 7th floor, the building's structure was a typical tube-frame design, with columns in the core and on the perimeter, and lateral loads resisted by perimeter moment frames.[13]

Transfer trusses used on the 5–7th floors to redistribute load to the foundation

A shipping and receiving ramp, which served the entire World Trade Center complex, occupied the eastern quarter of the 7 World Trade Center footprint. The building was open below the 3rd floor, providing space for truck clearance on the shipping ramp.[13] The spray-on fireproofing for structural steel elements was gypsum-based Monokote which had a two-hour fire rating for steel beams, girders and trusses, and a three-hour rating for columns.[5]:11

Mechanical equipment was installed on floors four through seven, including 12 transformers on the 5th floor. Several emergency generators installed in the building were used by the Office of Emergency Management, Salomon Smith Barney, and other tenants.[5]:13 In order to supply the generators, 24,000 gallons (91,000 L) of diesel fuel were stored below ground level.[15] Diesel fuel distribution components were located at ground level, up to the ninth floor.[16]:35 After the World Trade Center bombings of February 26, 1993, New York City mayor Rudy Giuliani decided to situate the emergency command center and associated fuel tanks at 7 World Trade Center. Although this decision was criticized in light of the events of 9/11, the fuel in the building is today not believed to have contributed to the collapse of the building.[17][18]:2 The roof of the building included a small west penthouse and a larger east mechanical penthouse.[12]

Each floor had 47,000 sq ft (4,400 m2) of rentable office space which made the building's floor plans considerably larger than most office buildings in the City.[19] In all, 7 World Trade Center had 1,868,000 sq ft (173,500 m2) of office space.[5]:1 Two pedestrian bridges connected the main World Trade Center complex, across Vesey Street, to the third floor of 7 World Trade Center. The lobby of 7 World Trade Center had three murals by artist Al Held: The Third Circle, Pan North XII, and Vorces VII.[20][21]

Tenants

The position of building 7 in relation to the other WTC buildings before September 11, 2001

In June 1986, before construction was completed, Silverstein signed Drexel Burnham Lambert as a tenant to lease the entire 7 World Trade Center building for $3 billion over a term of 30 years.[22] In December 1986, after the Boesky insider-trading scandal, Drexel Burnham Lambert canceled the lease, leaving Silverstein to find other tenants.[23] Spicer & Oppenheim agreed to lease 14 percent of the space, but for more than a year, as Black Monday and other factors adversely affected the Lower Manhattan real estate market, Silverstein was unable to find tenants for the remaining space. By April 1988, Silverstein had lowered the rent and made other concessions.[24]

In November 1988, Salomon Brothers withdrew from plans to build a large new complex at Columbus Circle in Midtown and agreed to a 20-year lease for the top 19 floors of 7 World Trade Center.[25] The building was extensively renovated in 1989 to accommodate the needs of Salomon Brothers. This led to the alternative naming of the building as the Salomon Brothers building.[26] Most of three existing floors were removed as tenants continued to occupy other floors, and more than 350 tons (U.S.) of steel were added to construct three double-height trading floors. Nine diesel generators were installed on the 5th floor as part of a backup power station. "Essentially, Salomon is constructing a building within a building – and it's an occupied building, which complicates the situation", said a district manager of Silverstein Properties. The unusual task was possible, said Larry Silverstein, because it was designed to allow for "entire portions of floors to be removed without affecting the building's structural integrity, on the assumption that someone might need double-height floors."[26]

At the time of the September 11, 2001, attacks, Salomon Smith Barney was by far the largest tenant in 7 World Trade Center, occupying 1,202,900 sq ft (111,750 m2) (64 percent of the building) which included floors 28–45.[5]:2[27] Other major tenants included ITT Hartford Insurance Group (122,590 sq ft/11,400 m²), American Express Bank International (106,117 sq ft/9,900 m²), Standard Chartered Bank (111,398 sq ft/10,350 m²), and the Securities and Exchange Commission (106,117 sq ft/9,850 m²).[27] Smaller tenants included the Internal Revenue Service Regional Council (90,430 sq ft/8,400 m²) and the United States Secret Service (85,343 sq ft/7,900 m²).[27] The smallest tenants included the New York City Office of Emergency Management,[28] National Association of Insurance Commissioners, Federal Home Loan Bank, First State Management Group Inc., Provident Financial Management, and the Immigration and Naturalization Service.[27] The Department of Defense (DOD) and Central Intelligence Agency (CIA) shared the 25th floor with the IRS.[5]:2 Floors 46–47 were mechanical floors, as were the bottom six floors and part of the seventh floor.[5]:2[29]

9/11 and collapse

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

File:Wtc7onfire.jpg
7 World Trade Center on fire after the collapse of the Twin Towers on 9/11

Collapse

As the North Tower collapsed on September 11, 2001, heavy debris hit 7 World Trade Center, damaging the south face of the building[30]:18 (PDF p. 22) and starting fires that continued to burn throughout the afternoon.[6]:16, 18 The collapse also caused damage to the southwest corner between Floors 7 and 17 and on the south face between Floor 44 and the roof; other possible structural damage included a large vertical gash near the center of the south face between Floors 24 and 41.[6]:17 The building was equipped with a sprinkler system, but had many single-point vulnerabilities for failure: the sprinkler system required manual initiation of the electrical fire pumps, rather than being a fully automatic system; the floor-level controls had a single connection to the sprinkler water riser; and the sprinkler system required some power for the fire pump to deliver water.[31]:11 Additionally, water pressure was low, with little or no water to feed sprinklers.[32]:23–30

After the North Tower collapsed, some firefighters entered 7 World Trade Center to search the building. They attempted to extinguish small pockets of fire, but low water pressure hindered their efforts.[33] Over the course of the day, fires burned out of control on several floors of 7 World Trade Center, the flames visible on the east side of the building.[34][35]:4 During the afternoon, the fire was also seen on floors 6–10, 13–14, 19–22, and 29–30.[30]:24 (PDF p. 28) In particular, the fires on floors 7 through 9 and 11 through 13 continued to burn out of control during the afternoon.[36]

At approximately 2:00 pm, firefighters noticed a bulge in the southwest corner of 7 World Trade Center between the 10th and 13th floors, a sign that the building was unstable and might collapse.[37] During the afternoon, firefighters also heard creaking sounds coming from the building.[38] Around 3:30 pm, FDNY Chief Daniel A. Nigro decided to halt rescue operations, surface removal, and searches along the surface of the debris near 7 World Trade Center and evacuate the area due to concerns for the safety of personnel.[39] The fire expanded the girders of the building, causing some to lose their structural integrity. This led column number 79, a critical column supporting a large part of the 13th floor, to buckle, causing the floors above it to collapse to the fifth floor; however, this could not be seen from outside the building. The structure also developed cracks in the facade just before the entire building started to fall.[6]:21[40] According to FEMA, this collapse started at 5:20:33 pm EDT when the east mechanical penthouse started crumbling.[5]:23[41] Differing times are given as to what time the building completely collapsed:[41] at 5:21:10 pm EDT according to FEMA,[5]:23 and at 5:20:52 pm EDT according to NIST.[6]:19, 21, 50–51 There were no casualties associated with the collapse.[40] NIST found no evidence to support conspiracy theories such as the collapse being the result of explosives; it found that a combination of factors including physical damage, fire and the building's unusual construction set off a chain-reaction collapse.[42]

Reports

File:Wtc7 collapse progression.png
Schematic view of collapse progression, with structural failure initiating on lower floors, on the east side of the building and vertical progression up to the east mechanical penthouse

In May 2002, the Federal Emergency Management Agency (FEMA) issued a report on the collapse based on a preliminary investigation conducted jointly with the Structural Engineering Institute of the American Society of Civil Engineers under leadership of Dr. W. Gene Corley, P.E. FEMA made preliminary findings that the collapse was not primarily caused by actual impact damage from the collapse of 1 WTC and 2 WTC but by fires on multiple stories ignited by debris from the other two towers that continued burning unabated due to lack of water for sprinklers or manual firefighting. The report did not reach conclusions about the cause of the collapse and called for further investigation.[18]:3

Subsequently, the National Institute of Standards and Technology (NIST) was authorized to lead an investigation into the structural failure and collapse of the World Trade Center Twin Towers and 7 World Trade Center.[36] The investigation, led by Dr S. Shyam Sunder, drew upon in-house technical expertise as well as the knowledge of several outside private institutions, including the Structural Engineering Institute of the American Society of Civil Engineers (SEI/ASCE); the Society of Fire Protection Engineers (SFPE); the National Fire Protection Association (NFPA); the American Institute of Steel Construction (AISC); the Council on Tall Buildings and Urban Habitat (CTBUH); and the Structural Engineers Association of New York (SEAoNY).[43][44]

Few photos and video clips exist that show the damage sustained to the south face of 7 World Trade Center on 9/11. An ABC News helicopter captured footage of the south face of 7 World Trade Center, including a glimpse of a gash, extending approximately 10 stories.

The bulk of the investigation of 7 World Trade Center was delayed until after reports were completed on the Twin Towers.[36] In the meantime, NIST provided a preliminary report about 7 WTC in June 2004, and thereafter released occasional updates on the investigation.[30] According to NIST, the investigation of 7 World Trade Center was delayed for a number of reasons, including that NIST staff who had been working on 7 World Trade Center were assigned full-time from June 2004 to September 2005 to work on the investigation of the collapse of the Twin Towers.[45] In June 2007, Shyam Sunder explained,

We are proceeding as quickly as possible while rigorously testing and evaluating a wide range of scenarios to reach the most definitive conclusion possible. The 7 WTC investigation is in some respects just as challenging, if not more so, than the study of the towers. However, the current study does benefit greatly from the significant technological advances achieved and lessons learned from our work on the towers.[46]

BMCC's Fiterman Hall was heavily damaged from the collapse of 7 World Trade Center.

In November 2008, NIST released its final report on the causes of the collapse of 7 World Trade Center.[6] This followed NIST's August 21, 2008, draft report which included a period for public comments.[36] In its investigation, NIST utilized ANSYS to model events leading up to collapse initiation and LS-DYNA models to simulate the global response to the initiating events.[47]:6–7 NIST determined that diesel fuel did not play an important role, nor did the structural damage from the collapse of the Twin Towers or the transfer elements (trusses, girders, and cantilever overhangs). The lack of water to fight the fire was an important factor. The fires burned out of control during the afternoon, causing floor beams near column 79 to expand and push a key girder off its seat, triggering the floors to fail around column 79 on Floors 8 to 14. With a loss of lateral support across nine floors, column 79 buckled – pulling the east penthouse and nearby columns down with it. With the buckling of these critical columns, the collapse then progressed east-to-west across the core, ultimately overloading the perimeter support, which buckled between Floors 7 and 17, causing the remaining portion of the building above to fall downward as a single unit. The fires, which were fueled by office contents and burned for 7 hours, along with the lack of water, were the key reasons for the collapse.[6]:21–22 Incidentally, this made the old 7 WTC the only steel skyscraper at the time to have collapsed from fire.[7]

When 7 WTC collapsed, debris caused substantial damage and contamination to the Borough of Manhattan Community College's Fiterman Hall building, located adjacent at 30 West Broadway, to the extent that the building was not salvageable.[48] A revised plan called for demolition in 2009 and completion of the new Fiterman Hall in 2012, at a cost of $325 million.[49][50] The adjacent Verizon Building, an art deco building constructed in 1926, had extensive damage to its east facade from the collapse of 7 World Trade Center, though it was able to be restored at a cost of US$1.4 billion.[51]

Aerial view of WTC remains and neighboring buildings after 9/11, with the original footprints of the Twin Towers and 7 WTC outlined

Files relating to numerous federal investigations had been housed in 7 World Trade Center. The Equal Employment Opportunity Commission estimated over 10,000 of its cases were affected.[52] Investigative files in the Secret Service's largest field office were lost, with one Secret Service agent saying, "All the evidence that we stored at 7 World Trade, in all our cases, went down with the building."[53] Copies of emails in connection with the WorldCom scandal that were later requested by the SEC from Salomon Brothers, a subsidiary of Citigroup housed in the building, were also destroyed.[54]

The NIST report found no evidence supporting the conspiracy theories that 7 World Trade Center was brought down by controlled demolition. Specifically, the window breakage pattern and blast sounds that would have resulted from the use of explosives were not observed.[6]:26–28 The suggestion that an incendiary material such as thermite was used instead of explosives was considered unlikely by NIST because of observations of the fire and the building's structural response to the fire, and because it is unlikely the necessary quantity of material could have been planted without discovery.[36] Based on its investigation, NIST reiterated several recommendations it had made in its earlier report on the collapse of the Twin Towers.[6]:63–73 It urged immediate action on a further recommendation: that fire resistance should be evaluated under the assumption that sprinklers are unavailable;[6]:65–66 and that the effects of thermal expansion on floor support systems be considered.[6]:65, 69 Recognizing that current building codes are drawn to prevent loss of life rather than building collapse, the main point of NIST's recommendations was that buildings should not collapse from fire even if sprinklers are unavailable.[6]:63–73

New building

<templatestyles src="Stack/styles.css"/>

Preliminary site plans for the World Trade Center rebuild
The new 7 World Trade Center from the ground

Lua error in package.lua at line 80: module 'strict' not found.

The new 7 World Trade Center has 52 stories and is 741 ft (226 m) tall.[55][56] The building has 42 floors of leasable space, starting at the 11th floor, and a total of 1,700,000 sq ft (160,000 m2) of office space.[57] The first ten floors house an electrical substation which provides power to much of Lower Manhattan. The office tower has a narrower footprint at ground level than did its predecessor, so the course of Greenwich Street could be restored to reunite TriBeCa and the Financial District.[58]

Design

David Childs of Skidmore, Owings and Merrill worked in conjunction with glass artist and designer James Carpenter to create a design that uses ultra-clear, low-iron glass to provide reflectivity and light, with stainless-steel spandrels behind the glass to help reflect sunlight.[59] Stainless steel used in the building façade is molybdenum-containing Type 316, which provides improved resistance to corrosion.[60] To enclose the power substation and improve its aesthetics, the base of the building has a curtain wall with stainless steel louvers that provide ventilation for the machinery.[61] During the day, the curtain wall reflects light, while at night it is illuminated with blue LED lights.[62] The curtain wall around the lobby uses heavily laminated, heat-strengthened glass that meets high standards for blast resistance.[63] At night, a large cube of light above the lobby also emanates blue light, while during the day it provides white light to the lobby, and at dusk it transitions to violet and back to blue.[64] Inside the main lobby, artist Jenny Holzer created a large light installation with glowing text moving across wide plastic panels.[59] The entire wall, which is 65 ft (20 m) wide and 14 ft (4.3 m) tall, changes color according to the time of day. Holzer worked with Klara Silverstein, the wife of Larry Silverstein, to select poetry for the art installation. The wall is structurally fortified as a security measure.[65]

The building is being promoted as the safest skyscraper in the U.S.[66] According to Silverstein Properties, the owner of the building, it "incorporate[s] a host of life-safety enhancements that will become the prototype for new high-rise construction."[67] The building has 2-foot-thick (0.61 m) reinforced-concrete and fireproofed elevator and stairway access shafts. The original building used only drywall to line these shafts.[68] The stairways are wider than in the original building to permit faster egress.[68]

7 World Trade Center is equipped with Otis destination elevators.[69] After pressing a destination floor number on a lobby keypad, passengers are grouped and directed to specific elevators that will stop at the selected floor (there are no buttons to press inside the elevators). This system is designed to reduce elevator waiting and travel times. The elevator system is integrated with the lobby turnstile and card reader system that identifies the floor on which a person works as he or she enters and can automatically call the elevator for that floor.[70]

Nearly 30 percent of structural steel used in the building consists of recycled steel.[71] Rainwater is collected and used for irrigation of the park and to cool the building.[59] Along with other sustainable design features, the building is designed to allow in plenty of natural light, power is metered to tenants to encourage them to conserve energy, the heating steam is reused to generate some power for the building, and recycled materials are used for insulation and interior materials.[72][73]

Construction

7 World Trade Center construction in October 2004

Construction of the new 7 World Trade Center began on May 7, 2002, with the installation of a fence around the construction site.[1] Tishman Construction Corporation of New York began work at the new 7 World Trade Center in 2002, soon after the site was cleared of debris. Restoring the Con Ed electrical substation was an urgent priority to meet power demands of Lower Manhattan.[58] Because 7 World Trade Center is separate from the main 16-acre (6.5 ha) World Trade Center site, Larry Silverstein required approval from only the Port Authority, and rebuilding was able to proceed quickly.[74] Building Seven was not included in the original World Trade Center master plan by Daniel Libeskind, but was designed by Skidmore, Owings & Merrill under the leadership of David Childs, who largely redesigned One World Trade Center.

Once construction of the power substation was complete in October 2003, work proceeded on building the office tower. An unusual approach was used in constructing the building; erecting the steel frame before adding the concrete core. This approach allowed the construction schedule to be shortened by a few months.[75] Construction was completed in 2006 at a cost of $700 million.[59] Though Silverstein received $861 million from insurance on the old building, he owed more than $400 million on its mortgage.[76] Costs to rebuild were covered by $475 million in Liberty Bonds, which provide tax-exempt financing to help stimulate rebuilding in Lower Manhattan and insurance money that remained after other expenses.[77]

A 15,000 sq ft (1,400 m2) triangular park was created between the extended Greenwich Street and West Broadway by David Childs with Ken Smith and his colleague, Annie Weinmayr, of Ken Smith Landscape Architect. The park comprises an open central plaza with a fountain and flanking groves of sweetgum trees and boxwood shrubs.[78] At the center of the fountain, sculptor Jeff Koons created Balloon Flower (Red), whose mirror-polished stainless steel represents a twisted balloon in the shape of a flower.[79]

Opening

The building was officially opened at noon on May 23, 2006, with a free concert featuring Suzanne Vega, Citizen Cope, Bill Ware Vibes, Brazilian Girls, Ollabelle, Pharaoh's Daughter, Ronan Tynan (of the Irish Tenors), and special guest Lou Reed.[80] Prior to opening, in March 2006, the new 7 World Trade Center frontage and lobby were used in scenes for the movie Perfect Stranger with Halle Berry and Bruce Willis.[81]

Since the building opened, several unleased upper floors have been used for events such as charity lunches, fashion shows, and black-tie galas. Silverstein Properties allowed space in the new building to be used for these events as a means to draw people to see the building.[82] From September 8 to October 7, 2006, the work of photographer Jonathan Hyman was displayed in "An American Landscape", a free exhibit hosted by the World Trade Center Memorial Foundation at 7 World Trade Center. The photographs captured the response of people in New York City and across the United States after the September 11, 2001, attacks. The exhibit took place on the 45th floor while the space remained available for lease.[83]

New York Academy of Sciences office (lobby) on the 40th floor

By March 2007, 60 percent of the building had been leased.[84] In September 2006, Moody's signed a 20-year lease to rent 15 floors of 7 World Trade Center.[85][86] Other tenants that had signed leases in 7 World Trade Center, as of May 2007, include ABN AMRO,[87] Ameriprise Financial Inc.,[88] law firm WilmerHale, Darby & Darby P.C.,[89] Mansueto Ventures LLC, business publisher of Fast Company and Inc.,[90] and the New York Academy of Sciences.[91]

The space occupied by Mansueto Ventures has been designed to use the maximum amount of natural light and has an open floor plan.[92] The space used by the New York Academy of Sciences on the 40th floor, designed by H3 Hardy Collaboration Architecture, works with the parallelogram shape of the building. Keeping with the green design of the building, the NYAS uses recycled materials in many of the office furnishings, has zoned heating and cooling, and lights that detect motion, coming on automatically only when people are present, and adjust according to incoming sunlight.[93]

Silverstein Properties also has offices and the Silver Suites executive office suites[94] in 7 World Trade Center, along with office space used by the architectural and engineering firms working on 1 World Trade Center, 150 Greenwich Street, 175 Greenwich Street, and 200 Greenwich Street.[95] The building became fully leased in September 2011 when MSCI Inc. was reported to have leased a 125,000-square-foot space on the top floor.[96]

See also

References

  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 3.2 7 World Trade Center, Skidmore, Owings & Merrill
  4. 4.0 4.1 4.2
    • Building Tenants, Silverstein Properties
    • Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 Lua error in package.lua at line 80: module 'strict' not found.
  6. 6.00 6.01 6.02 6.03 6.04 6.05 6.06 6.07 6.08 6.09 6.10 6.11 6.12 Lua error in package.lua at line 80: module 'strict' not found.
  7. 7.0 7.1 Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. 9.0 9.1 Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. 12.0 12.1 Lua error in package.lua at line 80: module 'strict' not found.
  13. 13.0 13.1 13.2 Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
    • Lua error in package.lua at line 80: module 'strict' not found.
    • "Rudy Giuliani's 5 Big Lies About 9/11: On the Stump, Rudy Can't Help Spreading Smoke and Ashes About His Dubious Record," Village Voice August 8–14, 2007, pp. 22–36.
    • Lua error in package.lua at line 80: module 'strict' not found.
    • Lua error in package.lua at line 80: module 'strict' not found.
    • Lua error in package.lua at line 80: module 'strict' not found.
    • Lua error in package.lua at line 80: module 'strict' not found.
  17. 18.0 18.1 Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.
  19. Lua error in package.lua at line 80: module 'strict' not found.
  20. Lua error in package.lua at line 80: module 'strict' not found.
  21. Lua error in package.lua at line 80: module 'strict' not found.
  22. Lua error in package.lua at line 80: module 'strict' not found.
  23. Lua error in package.lua at line 80: module 'strict' not found.
  24. Lua error in package.lua at line 80: module 'strict' not found.
  25. 26.0 26.1 Lua error in package.lua at line 80: module 'strict' not found.
  26. 27.0 27.1 27.2 27.3 Lua error in package.lua at line 80: module 'strict' not found.
  27. Lua error in package.lua at line 80: module 'strict' not found.
  28. Lua error in package.lua at line 80: module 'strict' not found.
  29. 30.0 30.1 30.2 Lua error in package.lua at line 80: module 'strict' not found.
  30. Lua error in package.lua at line 80: module 'strict' not found.
  31. Lua error in package.lua at line 80: module 'strict' not found.
  32. Lua error in package.lua at line 80: module 'strict' not found.
  33. Lua error in package.lua at line 80: module 'strict' not found.
  34. Lua error in package.lua at line 80: module 'strict' not found.
  35. 36.0 36.1 36.2 36.3 36.4 Lua error in package.lua at line 80: module 'strict' not found.
  36. Lua error in package.lua at line 80: module 'strict' not found.
  37. Lua error in package.lua at line 80: module 'strict' not found.
  38. Lua error in package.lua at line 80: module 'strict' not found.
  39. 40.0 40.1 Lua error in package.lua at line 80: module 'strict' not found.
  40. 41.0 41.1 Lua error in package.lua at line 80: module 'strict' not found. – View footage on YouTube of the collapse captured by CBS.
  41. Lua error in package.lua at line 80: module 'strict' not found.
  42. Lua error in package.lua at line 80: module 'strict' not found.
  43. Lua error in package.lua at line 80: module 'strict' not found.
  44. Lua error in package.lua at line 80: module 'strict' not found.
  45. Lua error in package.lua at line 80: module 'strict' not found.
  46. Lua error in package.lua at line 80: module 'strict' not found.
  47. Lua error in package.lua at line 80: module 'strict' not found.
  48. Lua error in package.lua at line 80: module 'strict' not found.
  49. Agovino T Ground Zero building to be razed Crain's New York Business November 13, 2008
  50. Lua error in package.lua at line 80: module 'strict' not found.
  51. Lua error in package.lua at line 80: module 'strict' not found.
  52. Lua error in package.lua at line 80: module 'strict' not found.
  53. Lua error in package.lua at line 80: module 'strict' not found.
  54. Lua error in package.lua at line 80: module 'strict' not found.
  55. Lua error in package.lua at line 80: module 'strict' not found.
  56. Lua error in package.lua at line 80: module 'strict' not found.
  57. 58.0 58.1 Lua error in package.lua at line 80: module 'strict' not found.
  58. 59.0 59.1 59.2 59.3 Lua error in package.lua at line 80: module 'strict' not found.
  59. Lua error in package.lua at line 80: module 'strict' not found.
  60. Lua error in package.lua at line 80: module 'strict' not found.
  61. Lua error in package.lua at line 80: module 'strict' not found.
  62. Lua error in package.lua at line 80: module 'strict' not found.
  63. Lua error in package.lua at line 80: module 'strict' not found.
  64. Lua error in package.lua at line 80: module 'strict' not found.
  65. Lua error in package.lua at line 80: module 'strict' not found.
  66. Lua error in package.lua at line 80: module 'strict' not found.
  67. 68.0 68.1 Lua error in package.lua at line 80: module 'strict' not found.
  68. Lua error in package.lua at line 80: module 'strict' not found.
  69. Lua error in package.lua at line 80: module 'strict' not found.
  70. Lua error in package.lua at line 80: module 'strict' not found.
  71. Lua error in package.lua at line 80: module 'strict' not found.
  72. Lua error in package.lua at line 80: module 'strict' not found.
  73. Lua error in package.lua at line 80: module 'strict' not found.
  74. Lua error in package.lua at line 80: module 'strict' not found.
  75. Lua error in package.lua at line 80: module 'strict' not found.
  76. Lua error in package.lua at line 80: module 'strict' not found.
  77. Lua error in package.lua at line 80: module 'strict' not found.
  78. Lua error in package.lua at line 80: module 'strict' not found.
  79. Lua error in package.lua at line 80: module 'strict' not found.
  80. Lua error in package.lua at line 80: module 'strict' not found.
  81. Lua error in package.lua at line 80: module 'strict' not found.
  82. Lua error in package.lua at line 80: module 'strict' not found.
  83. Lua error in package.lua at line 80: module 'strict' not found.
  84. Lua error in package.lua at line 80: module 'strict' not found..
  85. Lua error in package.lua at line 80: module 'strict' not found.
  86. Lua error in package.lua at line 80: module 'strict' not found.
  87. Lua error in package.lua at line 80: module 'strict' not found.
  88. Lua error in package.lua at line 80: module 'strict' not found.
  89. Lua error in package.lua at line 80: module 'strict' not found.
  90. Lua error in package.lua at line 80: module 'strict' not found.
  91. Lua error in package.lua at line 80: module 'strict' not found.
  92. Lua error in package.lua at line 80: module 'strict' not found.
  93. Lua error in package.lua at line 80: module 'strict' not found.
    • Lua error in package.lua at line 80: module 'strict' not found.
    • Lua error in package.lua at line 80: module 'strict' not found.
  94. Lua error in package.lua at line 80: module 'strict' not found.

External links