MS Allure of the Seas

From Infogalactic: the planetary knowledge core
(Redirected from Allure of the Seas)
Jump to: navigation, search
MS Allure of the Seas
Allure of the Seas (ship, 2009) 001.jpg
Allure of the Seas in Falmouth, Jamaica
History
Name: Allure of the Seas
Owner: Royal Caribbean Cruises Ltd.
Operator: Royal Caribbean International
Port of registry: Nassau,  Bahamas
Ordered: 31 March 2007[1][2]
Builder: STX Europe Turku Shipyard, Finland
Cost: US$1.2 billion (2006)
Yard number: 1364[1]
Laid down: 2 December 2008[3][4]
Launched: 20 November 2009[1][4]
Christened: 28 November 2010[5]
Maiden voyage: 1 December 2010[6]
Identification:
Status: In service
General characteristics
Class & type: Oasis-class cruise ship
Tonnage:
Displacement: Approximately 100,000 tons[7]
Length: 362 m (1,187 ft)[8]
Beam:
  • 47 m (154 ft) waterline[2]
  • 60.5 m (198 ft) max beam[2]
Height: 72 m (236 ft) above water line[4]
Draught: 9.3 m (31 ft)[2]
Depth: 22.5 m (74 ft)[2]
Decks: 16 passenger decks[9][10]
Installed power:
  • 3 × 13,860 kW (18,590 hp) Wärtsilä 12V46D
  • 3 × 18,480 kW (24,780 hp) Wärtsilä 16V46D
Propulsion:
  • 3 × 20 MW (27,000 hp) ABB Azipod,
  •       all azimuthing
  • 4 × 5.5 MW (7,400 hp) Wärtsilä CT3500
  •       bow thrusters[11]
Speed: 22.6 knots (41.9 km/h; 26.0 mph)[8]
Capacity:
  • 5,400 passengers at double occupancy[12]
  • 6,296 maximum[12]
Crew: 2,384 as of July 2012[8]
Notes: 50 mm (2.0 in) longer than Oasis[13]

MS Allure of the Seas is an Oasis-class cruise ship owned and operated by Royal Caribbean International. The Oasis class are the largest passenger ships ever constructed, and Allure is 50 millimetres (2.0 in) longer than her sister ship Oasis of the Seas, though both were built to the same specifications.[13] Designed under the name "Project Genesis", she was ordered from Aker Finnyards in February 2006 and her construction began at the Perno shipyard, Turku, Finland, in February 2008.[14] She was named in May 2008 after a contest was held to name her and her sister.[15] The keel of Allure of the Seas was laid on 2 December 2008, shortly after the shipyard had been acquired by STX Europe.[3] As of 2015, she is the world's largest passenger cruise ship.

History

The keel of Allure of the Seas was laid on 2 December 2008 at the STX Europe shipyards in Turku, Finland, during a ceremony involving Royal Caribbean and STX representatives.[3] She was launched on 20 November 2009,[1] and outfitting continued through her departure from the yards. She left the Turku shipyard on 29 October 2010, at 05:45 UTC, heading directly to her future home port of Port Everglades, near Fort Lauderdale, Florida, USA.[16] The ship is equipped with telescoping funnels to pass under bridges such as the Storebælt Bridge, which she passed on 30 October 2010. While media has reported that there was only 30 centimetres (12 in) of clearance, the truth is that at the mean water level it was closer to 2–3 metres (6.6–9.8 ft) and the much-advertised squat effect, whereby vessels traveling at speed in a shallow channel will be drawn deeper into the water, did not have significant effect on the draft of the vessel.[13]

On 11 November 2010, at approximately 09:30 EST, Allure of the Seas arrived at her home port of Port Everglades, Florida. She was greeted by thousands of spectators waiting on the shore.[citation needed]

The ship was formally named by her godmother Princess Fiona on 28 November 2010.[5]

Technical details

While the design length of Allure of the Seas is the same as that of her sister, 360 metres (1,181 ft),[2] she is actually some 50 millimetres (2 in) longer than Oasis of the Seas. According to the shipyard, this is not intentional and such small differences in length may occur simply due to the temperature of the steel in a ship as big as this.[13] The gross tonnage of Allure of the Seas is 225,282 and her displacement is equal to that of Oasis of the Seas, which is estimated to be around 100,000 metric tons, slightly less than that of an American Nimitz-class aircraft carrier.[7] Her steel hull alone weighs roughly 54,000 tons.[13]

The ship features a two-deck dance hall, a theatre with 1,380 seats, an ice skating rink, 7 distinct "neighborhoods", and 25 dining options,[17] including the first Starbucks coffee shop at sea.[18] Many of the ship's interiors were extensively decorated by muralist Clarissa Parish.[19]

Before beginning service from Port Everglades, Allure was fitted with an 80 kW solar array by BAM Energy Group which powers the shopping district. The system cost US$600,000 and covers an area of 2,000 m2 (21,530 sq ft). It uses Uni-Solar BIPV laminates designed to withstand foot traffic and marine conditions.[20][21]

Gallery

  • Allure of the Seas leaving STX shipyard, Turku, Finland

  • Allure of the Seas passing under the Great Belt Bridge

  • Allure of the Seas leaving Port Everglades

  • Royal Promenade

References

  1. ↑ 1.0 1.1 1.2 1.3 Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ 3.0 3.1 3.2 Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ 4.0 4.1 4.2 Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ 7.0 7.1 Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ 8.0 8.1 8.2 Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ 12.0 12.1 Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ 13.0 13.1 13.2 13.3 13.4 Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  15. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  16. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  17. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  18. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  19. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  20. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  21. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=MS_Allure_of_the_Seas&oldid=4065453"