Dragon V2
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
![]() Dragon 2 spacecraft conducting a propulsive hover test.
|
|
Description | |
---|---|
Role | Placing humans and cargo into Low Earth orbit (commercial use) and ISS commercial taxi CCtCap (government use), space colonization (planned) |
Crew | 7 (max. capacity) |
Launch vehicle | Falcon 9 |
Dimensions | |
Height | 8.1 metres (27 ft) with trunk[1] |
Diameter | 3.7 metres (12 ft) with trunk[2] |
Sidewall angle | 15 degrees |
Volume | 10 m3 (350 cu ft) pressurized[3] 14 m3 (490 cu ft) unpressurized[3] |
Dry mass | about 6,400 kg (14,100 lb)[4] |
Payload | to ISS 3,310 kg (7,300 lb). It can return to Earth up to 2,500 kg (5,500 lb)[5] |
Miscellaneous | |
Endurance | 1 week to 2 years[3] |
Re-entry at | 3.5 G[6][7] |
Thrusters | 8 x SuperDraco positioned around the perimeter of the vehicle in 4 pairs called “jet packs” and 18 in-space maneuvering Draco thrusters. |
Propellant | NTO/MMH[8] |
Dragon V2 (also Dragon 2, Crew Dragon, or formerly DragonRider) is the second version of the SpaceX Dragon spacecraft which will be a human-rated vehicle able to make a terrestrial soft landing.[9] It includes a set of four side-mounted thruster pods with two SuperDraco engines each, which can serve as a launch escape system (or launch abort system (LAS)) or be used for propulsive landings. Also, it has much larger windows, landing legs which extend from the bottom of the spacecraft, new flight computers and avionics, and redesigned solar arrays, all packaged in a spacecraft with a changed outer mold line from the initial cargo Dragon that has been flying for several years.[10]
The spacecraft was unveiled on May 29, 2014 during a press event at SpaceX headquarters in Hawthorne, California.[11][12][13] Designed to ferry astronauts to space, the capsule differs considerably from the cargo-carrying Dragon, which has been operational since 2010. Dragon V2 is scheduled to make an in-flight abort test late in 2016, an unmanned first orbital flight in May 2017[14] and to carry its first astronaut crew a few months later.[15] SpaceX completed a launch pad abort test of the spacecraft on 6 May 2015[16] and a hovering test on 24 November 2015.[17]
NASA has signed a contract to procure up to six crewed flights to the International Space Station under the Commercial Crew Development.
Contents
Dragon V2 development history
![](/w/images/thumb/f/f8/DragonRiderMockup.jpg/300px-DragonRiderMockup.jpg)
The crewed variant of Dragon was initially called DragonRider.[18] It was intended from the beginning to support a crew of seven or a combination of crew and cargo.[19][20] It was planned to be able to perform fully autonomous rendezvous and docking with manual override ability; and was designed to use the NASA Docking System (NDS) to dock to the ISS.[21][22] For typical missions, DragonRider would remain docked to the ISS for a period of 180 days, but would be designed to be able to do so for 210 days, the same as the Russian Soyuz spacecraft.[23][24][25] From the earliest design concepts which were publicly released in 2010, SpaceX planned to use an integrated pusher launch escape system for the Dragon spacecraft, claiming several advantages over the tractor detachable tower approach used on most prior crewed spacecraft.[26][27][28] These advantages include the provision for crew escape all the way to orbit, reusability of the escape system, improved crew safety due to eliminating a stage separation, and the ability to use the escape engines during landings for a precise solid earth landing of the capsule.[29] An emergency parachute system will be retained as a redundant backup for water landings.[29]
As of 2011[update], the Paragon Space Development Corporation was assisting in developing DragonRider's life support system.[30] In 2012, SpaceX was in talks with Orbital Outfitters about developing space suits to wear during launch and re-entry.[31]
At a NASA news conference on 18 May 2012, SpaceX confirmed again that their target launch price for crewed Dragon flights is $160,000,000, or $20,000,000 per seat if the maximum crew of 7 is aboard, and if NASA orders at least four DragonRider flights per year.[32] This contrasts with the 2014 Soyuz launch price of $76,000,000 per seat for NASA astronauts.[33]
In October 2014, NASA selected the Dragon spacecraft as one of the candidates to fly American astronauts to the International Space Station under the Commercial Crew Program. SpaceX plans to use the Falcon 9 launch vehicle for launching Dragon V2.[34][full citation needed][35]
SpaceX intends to certify their propulsive landing scheme, in parallel with the parachute-to-water-landing method for Dragon V2, with the goal to hold to the development schedule and "ensure U.S. crew transportation safely and reliably in 2017. Land landing will become the baseline for the early post-certification missions" while precision water landing under parachutes was proposed to NASA as "the baseline return and recovery approach for the first few flights of Crew Dragon."[36]
Following the successful test of the launchpad abort system in May 2015, Elon Musk indicated that the Dragon capsule platform, launched on a Falcon Heavy launch vehicle, could be used to transport robotic space probes across much of the solar system, including Earth's Moon, Mars, or Jupiter's moon Europa.[37] Musk indicated that Dragon could transport 2 to 4 tonnes (4,400 to 8,800 lb) of useful payload to the surface of Mars.
Technical specifications
Dragon V2 includes the following features:[11][12]
- Reuses: partly reusable; can be flown multiple times, resulting in a significant cut in the cost of access to space. SpaceX anticipates that about ten flights are possible before significant vehicle refurbishing is needed.
- Capacity: seven astronauts
- Landing: supports both propulsive-landing "almost anywhere in the world" with the accuracy of a helicopter with four extendable landing legs, plus a backup parachute-enabled landing ability.
- Engines: eight side-mounted SuperDraco engines, clustered in redundant pairs in four engine pods, with each engine able to produce 71 kilonewtons (16,000 lbf) of thrust[11] Each pod—called a "quad" by SpaceX—contains two SuperDraco engines plus four Draco thrusters. "Nominally, only two quads are used for on-orbit propellant with the Dracos and two quads are reserved for propulsive landing using the SuperDracos."[36]
- The first fully printed engine, the SuperDraco. Engine combustion chamber is printed of Inconel, an alloy of nickel and iron, using a process of direct metal laser sintering. Engines are contained in a protective nacelle to prevent fault propagation if an engine fails.
- Docking: able to autonomously dock to space stations. Dragon V1 used berthing, a non-autonomous means to attach to the ISS that was completed by use of the Canadarm2 robotic arm. Pilot ability to park the spacecraft using manual controls if needed
- Reservoirs: composite-carbon-overwrap titanium spherical tanks to hold the helium used to pressurize engines and also for the SuperDraco fuel and oxidizer
- Shield: updated third-generation PICA-X heat shield
- Controls: tablet-like computer that swivels down for optional crew control by the pilot and co-pilot
- Interior design: tan leather seats
- the spacecraft can be operated in full vacuum, and "the crew will wear SpaceX-designed space suits to protect them from a rapid cabin depressurization emergency event". Also, the spacecraft will be able to return safely if a leak occurs "of up to an equivalent orifice of 0.25 inches in diameter."[36]
- Movable ballast sled: to allow more precise attitude control of the spacecraft during the atmospheric entry phase of the return to Earth and more accurate control of the landing ellipse location.[36]
- Reusable nose cone: the second structural element of the spacecraft, "which protects the vessel and the docking adaptor during ascent and reentry"[36]—which pivots on a hinge to enable in-space docking, and returns to the covered position for reentry and future launches[13]
- Trunk: the third structural element of the spacecraft, which contains the solar arrays, heat-removal radiators, and will provide aerodynamic stability during emergency aborts.[36]
The landing system is being designed to accommodate three types of landing scenarios:
- Propulsive landing, for vertical takeoff, vertical landing (VTVL)
- Parachute landing, similar to prior American manned space capsules
- Parachute landing with propulsive assist, similar to that used by the Soyuz (spacecraft): "The whole landing system is designed so that it’s survivable if there’s no propulsive assist at all. So if you come down chutes only with the landing legs, we anticipate no crew injury. It’ll be kind of like landing in the Soyuz."[38]
The parachute system was fully redesigned from the one used in the Dragon V1 capsule, due to the need to deploy the parachutes under a variety of launch abort scenarios.[38]
Planned space transport missions
Dragon has been designed to fulfill a set of mission requirements that will make the capsule useful to both commercial and government customers. SpaceX and Bigelow Aerospace are working together to support round-trip transport of commercial passengers to low Earth orbit (LEO) destinations such as the planned Bigelow Commercial Space Station. In that use, the full passenger capacity of seven passengers is planned to be used.
SpaceX competed for a contract with NASA to deliver some number of specific crew-transport missions to the ISS under the third phase of the Commercial Crew Development program.[11]
In an August 2014 presentation, SpaceX revealed that if NASA chooses to use the Dragon V2 space capsule under a Commercial Crew Transportation Capability (CCtCap, Commercial Crew Development) contract, then only four of the seven possible seats would be used for carrying NASA-designated passengers to the ISS, as NASA would like to use the added payload mass and volume ability to carry pressurized cargo. Also, all NASA landings of Dragon V2 are planned to initially use the propulsive deceleration ability of the Super Draco engines only for a propulsive assist right before final touchdown, and would otherwise use parachutes "all the way down."[38]
On September 16, 2014, NASA announced that SpaceX, together with Boeing, has been selected to provide crew transport ability to ISS. SpaceX will receive $2.6 billion under this contract.[39] NASA considers Dragon to be the cheapest proposal.[35]
In a departure from prior NASA practice during the first five decades of the space age, where NASA contracted with commercial firms to build spaceflight equipment and then NASA operated the spacecraft directly, NASA is purchasing space transport services from SpaceX with the Dragon V2 contract, and will leave the launch, transit, and operation of the spacecraft to SpaceX.[40]
According to Elon Musk in a question and answer session at the May 29, 2014 unveiling of the Dragon V2, Dragon V1 will be used in tandem with Dragon V2 as a cargo ferry for coming years.
Following the Dragon V2 pad abort test in early May 2015, Musk revealed plans to use variant of the Dragon 2 spacecraft—in conjunction with the Falcon Heavy launch vehicle—to transport science cargos across much of the solar system, in cislunar and inner solar system regions such as Mars in 2018 but also to outer solar system destinations such as Jupiter's moon Europa. Details include that SpaceX expects to be able to transport 2,000–4,000 kg (4,400–8,800 lb) to the surface of Mars, including a soft retropropulsive landing using SuperDraco thrusters following a limited atmospheric deceleration. For destinations with no atmosphere, the Dragon variant would omit the parachute and heat shield, and add propellant.[41]
Flight testing
SpaceX is planning a program of four tests for the Dragon V2 that will include both a "pad abort" test, and an in-flight abort test, plus both an uncrewed robotic orbital flight to the ISS, and finally a 14-day crewed demonstration mission to the ISS in 2017.
Pad abort test
In August 2014, it was announced that the pad abort test would occur in Florida, at SpaceX's leased pad at SLC 40. While a flight-like Dragon V2 and trunk were used for the pad abort test, they rested atop a truss structure for the test rather than a full Falcon 9 rocket. A crash test dummy embedded with a suite of sensors was placed inside the test vehicle to record acceleration loads and forces at the crew seat, while the remaining six seats were loaded with weights to simulate full-passenger-load weight.[38][40][42] The test objective was to demonstrate sufficient total impulse, thrust and controllability to conduct a safe pad abort.
The pad abort test was conducted successfully on 6 May 2015 at approximately 0900 Eastern Daylight Time (EDT). The vehicle splashed down safely in the ocean to the east of the launchpad 99 seconds later.[16] A fuel mixture ratio issue was detected after the flight in one of the eight SuperDraco engines, but did not materially affect the flight.[43] More detailed test results were to be subsequently analyzed by both SpaceX and NASA engineers.[44]
Hovering test
On November 24, 2015, SpaceX conducted a test of Dragon 2's hovering abilities at the firm’s rocket development facility in McGregor, Texas. In a video published by the firm,[17] the spacecraft is shown suspended to a hoisting cable and igniting its SuperDraco engines. The capsule hovers in equilibrium for about 5 seconds, kept in balance by its 8 engines firing at reduced thrust to compensate exactly for gravity.
This video shows the second test of the two-part milestone under NASA’s Commercial Crew Development program. The first test, a short firing of the engines intended to verify a healthy propulsion system, was completed two days earlier on November 22.
In-flight abort test
As of February 2016[update], SpaceX plans to conduct an in-flight abort test in 2016 from Vandenberg AFB Space Launch Complex 4 in California before the first uncrewed orbital test flight.[15][45]
A special Falcon 9 first stage with just three engines will propel the Dragon V2 test capsule in a sub-orbital flight to conduct a separation and abort scenario in the troposphere at transonic velocity, around the Max Q point of maximal aerodynamic pressure.[46] The test objective is to demonstrate the ability to safely move away from the ascending rocket under the most challenging atmospheric conditions of the flight trajectory, imposing the worst structural stress of a real flight on the rocket and spacecraft.[38] The capsule will then splash down in the ocean with traditional parachutes, possibly with assistance of its integrated thrusters to smooth the final moments of the descent.
The three-engine first stage that will be used for the in-flight abort test was carried to the launch pad at Vandenberg for the first time in April 2015 to conduct a tanking test. It was erected on the revised and rebuilt transporter erector (TE) and fully loaded with propellants on 9 April 2015 to test both the vehicle and ground support equipment.[46]
Orbital tests
The first orbital test of Dragon V2 will be an uncrewed mission, designated SpX-DM1[40] and scheduled for May 2017.[14][15] The spacecraft will test the approach and automated docking procedures with the ISS, remain docked for a few weeks, then conduct the full re-entry, splashdown and recovery steps to qualify for a crewed mission. Life support systems will be monitored all along the test flight.
Subsequently, Dragon V2 is scheduled to carry its first crew of NASA astronauts on a 14-day mission to the ISS in the mid-2017 time frame.[15] Unless Boeing's CST-100 Starliner flies first, they will be the first people to ride an American spacecraft since the last Shuttle flight in 2011. This SpX-DM2 mission will complete the last milestone of the Commercial Crew Development program, paving the way to starting commercial services under an upcoming ISS Crew Transportation Services contract.[47][40]
See also
- Comparison of manned space vehicles
- Comparison of space station cargo vehicles
- Automated Transfer Vehicle – a one-use, expendable cargo vehicle that was in use by the European Space Agency (ESA) from 2008 until retirement in February 2015
- Blue Origin orbital spacecraft – an American private biconic nose cone design vehicle.
- Crew Exploration Vehicle
- CST-100, a crewed capsule spacecraft being developed by Boeing
- Dream Chaser, a spaceplane being developed in the early 2010s by Sierra Nevada Corporation[needs update]
- Orion (spacecraft), a spacecraft being built for NASA by Lockheed Martin
- Private spaceflight
- Federation (spacecraft) - a new-generation, reusable capsule, manned spacecraft proposal in Russia in the late 2000s
References
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 3.0 3.1 3.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ http://www.faa.gov/about/office_org/headquarters_offices/ast/media/DragonFly_Final_EA_sm.pdf
- ↑ "The ISS CRS contract (signed December 23, 2008)"
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 11.0 11.1 11.2 11.3 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 12.0 12.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 13.0 13.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 14.0 14.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 15.0 15.1 15.2 15.3 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 16.0 16.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 17.0 17.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ With the exception of the Project Gemini spacecraft, which used twin ejection seats: "Encyclopedia Astronautica: Gemini Ejection". Astronautix.com. Retrieved 24 January 2013.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ "Spaceship teams seek more funding". MSNBC Cosmic Log. 10 December 2010. Retrieved 14 December 2010.
- ↑ 29.0 29.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ http://www.spacex.com/news/2014/09/16/nasa-selects-spacex-be-part-americas-human-spaceflight-program
- ↑ 35.0 35.1 Norris, Guy. "Why NASA Rejected Sierra Nevada's Commercial Crew Vehicle" Aviation Week & Space Technology, 11 October 2014. Accessed: 13 October 2014. Archived on 13 October 2014
- ↑ 36.0 36.1 36.2 36.3 36.4 36.5 Lua error in package.lua at line 80: module 'strict' not found. (document source: SpaceX)
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 38.0 38.1 38.2 38.3 38.4 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 40.0 40.1 40.2 40.3 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 46.0 46.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
External links
Media related to Lua error in package.lua at line 80: module 'strict' not found. at Wikimedia Commons
- Articles containing potentially dated statements from 2011
- Articles containing potentially dated statements from February 2016
- Wikipedia articles in need of updating from March 2015
- All Wikipedia articles in need of updating
- Pages with broken file links
- Dragon (spacecraft)
- Supply vehicles for the International Space Station
- 2014 introductions