Dump truck
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
A dump truck (or, UK, dumper/tipper truck) is a truck used for transporting loose material (such as sand, gravel, or dirt) for construction. A typical dump truck is equipped with an open-box bed, which is hinged at the rear and equipped with hydraulic pistons to lift the front, allowing the material in the bed to be deposited ("dumped") on the ground behind the truck at the site of delivery. In the UK, Australia and India the term applies to off-road construction plant only, and the road vehicle is known as a tipper, tipper lorry (UK) or tip truck (AU).
Contents
- 1 History
- 2 Types
- 3 Dangers
- 4 Manufacturers
- 5 See also
- 6 References
- 7 Notes
- 8 External links
History
![](/w/images/thumb/2/24/Truck_with_motion_blur.jpg/300px-Truck_with_motion_blur.jpg)
The dump truck is thought to have been first conceived in the farms of late 19th century western Europe. Thornycroft developed a steam dust-cart in 1896 with a tipper mechanism.[1] The first motorized dump trucks in the United States were developed by small equipment companies such as The Fruehauf Trailer Corporation|), Galion Buggy Co. and Lauth-Juergens among many others around 1910.[2] Hydraulic dump beds were introduced by Wood Hoist Co. shortly after. Such companies flourished during World War I due to massive wartime demand. August Fruehauf had obtained military contracts for his semi-trailer, invented in 1914 and later created the partner vehicle, the semi-truck for use in World War I. After the war, Fruehauf introduced hydraulics in his trailers. They offered hydraulic lift gates, hydraulic winches and a dump trailer for sales in the early 1920s. Fruehauf became the premier supplier of dump trailers and their famed "bathtub dump" was considered to be the best by heavy haulers, road and mining construction firms. [3][4][5]
Companies like Galion Buggy Co. continued to grow after the war by manufacturing a number of express bodies and some smaller dump bodies that could be easily installed on either stock or converted (heavy-duty suspension and drivetrain) Model T chassis prior to 1920. Galion and Wood Mfg. Co. built all of the dump bodies offered by Ford on their heavy-duty AA and BB chassis during the 1930s.[6][7] Galion (now Galion Godwin Truck Body Co.) is the oldest known truck body manufacturer still in operation today.
The first known Canadian dump truck was developed in Saint John, New Brunswick when Robert T. Mawhinney attached a dump box to a flat bed truck in 1920. The lifting device was a winch attached to a cable that fed over sheave (pulley) mounted on a mast behind the cab. The cable was connected to the lower front end of the wooden dump box which was attached by a pivot at the back of the truck frame. The operator turned a crank to raise and lower the box. The first dump bed apparatus on a wheeled vehicle patented in Canada [8][9]
Types
Today, virtually all dump trucks operate by hydraulics and they come in a variety of configurations each designed to accomplish a specific task in the construction material supply chain.
Standard dump truck
![](/w/images/thumb/7/74/2012-06-11_white_Unimog_405_%28UGN%29_U400_dump_truck.jpg/300px-2012-06-11_white_Unimog_405_%28UGN%29_U400_dump_truck.jpg)
![](/w/images/thumb/e/e2/Ashok_Leyland_Tipper_Truck_726.jpg/300px-Ashok_Leyland_Tipper_Truck_726.jpg)
A standard dump truck is a truck chassis with a dump body mounted to the frame. The bed is raised by a vertical hydraulic ram mounted under the front of the body, or a horizontal hydraulic ram and lever arrangement between the frame rails, and the back of the bed is hinged at the back of the truck. The tailgate can be configured to swing up on top hinges (and sometimes also to fold down on lower hinges) or it can be configured in the "High Lift Tailgate" format wherein pneumatic rams lift the gate open and up above the dump body.
In the United States, a standard dump truck has one front steering axle, and one or two rear axles which typically have dual wheels on each side. Tandem rear axles are virtually always powered in the U.S., far less often in Europe. Most unpowered rear axles can be raised off the pavement, to minimize wear and tear when the truck is empty or lightly loaded, and lowered to become load-bearing when the truck needs the extra support. These are referred to as lift axles or drop axles. Lift axles can be steerable or non-steerable; steerable lift axles are always configured with single wheels on each side, instead of dual wheels. Lift axles positioned in front of the powered axles are called pushers; lift axles positioned behind the powered axles are called tags.
Common configurations for a standard dump truck include the four wheeler.[notes 1] (4x2) which has one powered rear axle, the six wheeler (6x2 or 6x4) with one or two powered rear axles, the tri-axle with one lift axle and two powered axles, and the quad with two lift axles and two powered axles. The largest of the standard European dump trucks is commonly called a "centipede" and has seven axles. The rear two axles are powered, the front axle is the steering axle, and the remaining four are lift axles. The intermediate axles are present to support the weight over the length of the chassis and sometimes to provide additional braking power. In the European Union, the dump truck configurations are 2, 3 and 4 axles. The 4-axle eight wheeler has two axles at the front and two at the rear and is limited to 32 metric tons (35 short tons; 31 long tons) gross weight in most EU countries. In the U.S. the most common large dump trucks, the "semi-dumps", have a 6x4 semi tractor and a two axle trailer.[notes 2] Although theoretically able to have a gross weight of 80,000 pounds, bridge formula laws[notes 3] usually reduce this.[10][11]
The shorter wheelbase of a standard dump truck often makes it more maneuverable than the higher capacity semi-trailer dump trucks.
Transfer dump truck
A transfer dump is a standard dump truck pulling a separate trailer with a movable cargo container, which can also be loaded with construction aggregate — gravel, sand, asphalt, klinkers, snow, wood chips, triple mix, etc.
The second aggregate container on the trailer ("B" box),[12] is powered by an electric motor, a pneumatic motor or a hydraulic line. It rolls on small wheels, riding on rails from the trailer's frame into the empty main dump container ("A" box). This maximizes payload capacity without sacrificing the maneuverability of the standard dump truck. Transfer dump trucks are typically seen in the western United States due to the peculiar weight restrictions on highways there.
Another configuration is called a triple transfer train, consisting of a "B" and "C" box. These are common on Nevada and Utah Highways, but not in California. Depending on the axle arrangement, a triple transfer can haul up to 129,000 kilograms (284,000 pounds) with a special permit in certain American states. As of 2007[update], a triple transfer costs a contractor about $105 an hour, while a A/B configuration costs about $85 per hour.
Transfer dump trucks typically haul between 26 and 27 short tons (23.6 and 24.5 t; 23.2 and 24.1 long tons) of aggregate per load, each truck is capable of 3-5 loads per day, generally speaking.
Truck and pup
A truck and pup is very similar to a transfer dump. It consists of a standard dump truck pulling a dump trailer. The pup trailer, unlike the transfer, has its own hydraulic ram and is capable of self-unloading.
Superdump truck
A Superdump is a straight dump truck equipped with a trailing axle, a liftable, load-bearing axle rated as high as 13,000 pounds (5,897 kg). Trailing 11 to 13 feet (3.35 to 3.96 m) behind the rear tandem, the trailing axle stretches the outer "bridge" measurement—the distance between the first and last axles—to the maximum overall length allowed. This increases the gross weight allowed under the federal bridge formula, which sets standards for truck size and weight. Depending on the vehicle length and axle configuration, Superdumps can be rated as high as 80,000 pounds (36,287 kg). GVW and carry 26 short tons (23.6 t; 23.2 long tons) of payload or more. When the truck is empty or ready to offload, the trailing axle toggles up off the road surface on two hydraulic arms to clear the rear of the vehicle. Truck owners call their trailing axle-equipped trucks Superdumps because they far exceed the payload, productivity, and return on investment of a conventional dump truck. The Superdump and trailing axle concept was developed by Strong Industries of Houston, Texas.
Semi trailer end dump truck
A semi end dump is a tractor-trailer combination wherein the trailer itself contains the hydraulic hoist. A typical semi end dump has a 3-axle tractor pulling a 2-axle semi-trailer. The key advantage of a semi end dump is rapid unloading. A key disadvantage is that they are very unstable when raised in the dumping position limiting their use in many applications where the dumping location is uneven or off level.
Semi trailer bottom dump truck
A semi bottom dump (or "belly dump") is a 3-axle tractor pulling a 2-axle trailer with a clam shell type dump gate in the belly of the trailer. The key advantage of a semi bottom dump is its ability to lay material in a windrow (a linear heap). In addition, a semi bottom dump is maneuverable in reverse, unlike the double and triple trailer configurations described below. These trailers may be found either of the windrow type shown in the photo, or may be of the "cross spread" type, with the gates opening front to rear instead of left and right. The cross spread gates will actually spread gravel fairly evenly the width of the trailer. By comparison, the windrow gates leave a pile in the middle. The cross spreads tend to jam and may not work well with coarse materials.
Double and triple trailer bottom dump truck
Double and triple bottom dumps consist of a 2-axle tractor pulling one single-axle semi-trailer and an additional full trailer (or two full trailers in the case of triples). These dump trucks allow the driver to lay material in windrows without leaving the cab or stopping the truck. The main disadvantage is the difficulty in backing double and triple units.
The specific type of dump truck used in any specific country is likely to be closely keyed to the weight and axle limitations of that jurisdiction. Rock, dirt and other types of materials commonly hauled in trucks of this type are quite heavy, and almost any style of truck can be easily overloaded. Because of that, this type of truck is frequently configured to take advantage of local weight limitations to maximize the cargo. For example, within the United States, the maximum weight limit is 40 short tons (36.3 t; 35.7 long tons) throughout the country, except for specific bridges with lower limits. Individual states, in some instances, are allowed to authorize trucks up to 52.5 short tons (47.6 t; 46.9 long tons). Most states that do so require that the trucks be very long, to spread the weight over more distance. It is in this context that double and triple bottoms are found within the United States.
Side dump truck
A side dump truck (SDT) consists of a 3-axle tractor pulling a 2-axle semi-trailer. It has hydraulic rams which tilt the dump body onto its side, spilling the material to either the left or right side of the trailer. The key advantages of the side dump are that it allows rapid unloading and can carry more weight in the western United States. In addition, it is almost immune to upset (tipping over) while dumping, unlike the semi end dumps which are very prone to tipping over. It is, however, highly likely that a side dump trailer will tip over if dumping is stopped prematurely. Also, when dumping loose materials or cobble sized stone, the side dump can become stuck if the pile becomes wide enough to cover too much of the trailer's wheels. Trailers that dump at the appropriate angle (50° for example) avoid the problem of the dumped load fouling the path of the trailer wheels by dumping their loads further to the side of the truck, in some cases leaving sufficient clearance to walk between the dumped load and the trailer.
Winter service vehicles
Many winter service vehicle units are based on dump trucks, to allow the placement of ballast to weigh the truck down or to hold sodium or calcium chloride salts for spreading on snow and ice covered surfaces.
Off-highway dump trucks
Off-highway dump trucks [13] are heavy construction equipment and share little resemblece to highway dump trucks. Bigger off-highway dump trucks are used strictly off-road for mining and heavy dirt hauling jobs. There are two primary forms: rigid frame and articulating frame.
The term ‘dump’ truck is not generally used by the mining industry, or by the manufacturers that build these machines. The more appropriate U.S. term for this strictly off road vehicle is "haul truck" and the equivalent European term is 'dumper'.
Haul truck
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Haul trucks are used in large surface mines and quarries. They have a rigid frame and conventional steering with drive at the rear wheel. As of late 2013, the largest ever production haul truck is the 450 metric ton BelAZ 75710, followed by the Liebherr T 282B, the Bucyrus MT6300AC and the Caterpillar 797F, which each have payload capacities of up to Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value).. Most large size haul trucks employ Diesel-electric powertrains, using the Diesel engine to drive an AC alternator or DC generator that sends electric power to electric motors at each rear wheel. The Caterpillar 797 is unique for its size, as it employs a Diesel engine to power a mechanical powertrain, typical of most road going vehicles and intermediary size haul trucks. Other major manufacturers of haul trucks include Hitachi, Komatsu, DAC, Terex and BelAZ.
Articulated hauler
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
An articulated dumper is an all-wheel drive, off-road dump truck. It has a hinge between the cab and the dump box, but is distinct from a semi-trailer truck in that the power unit is a permanent fixture, not a separable vehicle. Steering is accomplished via hydraulic cylinders that pivot the entire tractor in relation to the trailer, rather than rack and pinion steering on the front axle as in a conventional dump truck. By this way of steering, the trailers wheels follow the same path as the front wheels. Together with all-wheel drive and low center of gravity, it is highly adaptable to rough terrain. Major manufacturers include Volvo CE, Terex, John Deere and Caterpillar.
Dangers
Collisions
Dump trucks are normally built for some amount of off-road or construction site driving; as the driver is protected by the chassis and height of the driver's seat, bumpers are either placed high or omitted for added ground clearance. The disadvantage is that in a collision with a standard car, the entire motor section or luggage compartment goes under the truck. Thus, the passengers in the car could be more severely injured than would be common in a collision with another car. Several countries have made rules that new trucks should have bumpers approximately 40 cm (16 in) above ground in order to protect other drivers better. There are also rules about how long the load or construction of the truck can go beyond the rear bumper to prevent cars that rear-end the truck from going under it.[14]
Tipping
Another safety consideration is the leveling of the truck before unloading. If the truck is not parked on relatively horizontal ground, the sudden change of weight and balance due to lifting of the skip and dumping of the material can cause the truck to slide, or even to tip over.
Back-up accidents
Because of their size and the difficulty of maintaining visual contact with on-foot workers, dump trucks can be a threat, especially when backing up.[15] Mirrors and back-up alarms provide some level of protection, and having a spotter working with the driver also decreases back-up injuries and fatalities.[16]
Manufacturers
See also
References
- ↑ "An Automobile Dust-Cart". The Automotor and Horseless Carriage Journal, October 1897, p24
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ www.singingwheels.com
- ↑ Terrific Transportation Inventions by Laura Hamilton Waxman Copyright 2014 by Lerner Publishing Group, Inc., pp 20 (Website address: www.lernerbooks.com)
- ↑ Home Front Heroes: A Biographical Dictionary of Americans During Wartime. Edited by Benjamin F. Shearer, November 30, 2006, Volume 1, pp 319, Greenwood Publishing Group, Inc., Westport, Connecticut
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Mario Theriault, Great Maritme Inventions 1833-1950, Goose Lane Editions, 2001, p. 71
- ↑ Sketch of the first dump truck
- ↑ http://www.rsa.ie/SERVICES/upload/File/Vehicle%20Standards/Leaflet%20No.%201.doc retrieved 15-Jan-2010
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ http://www.youtube.com/watch?v=woi0T4XVf1s
- ↑ http://www.bcmuseumofmining.org/pdfs/The_Super_Haul_Truck_Resource.pdf
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ A Laborer Dies in a Street Work Zone after Being Backed Over by a Dump Truck. Fatality Assessment and Control Evaluation (FACE) Program. National Institute for Occupational Safety and Health. California Case Report: 07CA001.
- ↑ A Construction Inspector Dies After Being Backed Over by a Ten-wheel Asphalt Dump Truck. Fatality Assessment and Control Evaluation (FACE) Program. National Institute for Occupational Safety and Health. California FACE Investigation 00CA005.
Notes
- ↑ In the UK and United States it is more common to refer to the number of wheel hubs, rather than the number of tires, often designated as (number of wheels x number of powered wheels).
- ↑ In the U.S., five axles are able to legally support the maximum Federal GVW.
- ↑ A bridge formula restricts weight by wheelbase, the longer the wheelbase is, the heavier the vehicle can be.
External links
![]() |
Look up dump truck in Wiktionary, the free dictionary. |
Media related to Lua error in package.lua at line 80: module 'strict' not found. at Wikimedia Commons
- A YouTube video of a dump truck raising and lowering its load tray
- Caterpillar 730 Articulated Dump Truck on a loading cycle
- Bell B40D Articulated Dump Truck loading and unloading
- Articulated Dump Truck
- Volvo A40D Articulated Dump Truck at work moving over burdenbe:Самазвал