Virginia Dare Memorial Bridge
Virginia Dare Memorial Bridge | |
---|---|
File:USA 0412 OuterBanks.jpg
Image from the bridge
|
|
Coordinates | Lua error in package.lua at line 80: module 'strict' not found. |
Carries | US 64 Byp. |
Crosses | Croatan Sound |
Locale | Dare County |
Named for | Virginia Dare |
Owner | NCDOT |
Maintained by | NCDOT |
Characteristics | |
Design | Segmented girder |
Material | Prestressed concrete |
Total length | 27,581.4 feet (8,406.8 m) |
Width | 67.6 feet (20.6 m) |
Clearance below | 65.9 feet (20.1 m) |
History | |
Constructed by | Balfour Beatty Construction |
Construction cost | $90 million |
Opened | August 16, 2002 |
Statistics | |
Daily traffic | 4,000 (as of 2010) |
References | |
[1][2] |
The Virginia Dare Memorial Bridge is a four-lane automobile bridge spanning the Croatan Sound, between Manns Harbor and Roanoke Island, in Dare County, North Carolina. The bridge carries US 64 Bypass and is utilized by local and seasonal tourist traffic.
The bridge is dedicated to the memory of Virginia Dare, the first English child born in the Americas, in 1587.
At a length of 5.2 miles (8.4 km), the Virginia Dare Memorial Bridge is the longest in the state. It travels over .75 miles (1.21 km) of wetlands, with the remaining 4.45 miles (7.16 km) over the Croatan Sound. The bridge rises to 65 feet (20 m) at its apex and is supported by 88 concrete columns and more than 2,000 pilings, which extend 100 feet (30 m) below the water. The bridge deck has 7,250 tons of epoxy-coated reinforcement steel and was designed with a 100-year life span.[3][4]
The bridge complements the William B. Umstead Bridge, which carries US 64, between Manns Harbor and Manteo and is located further north. The bridge, along with the Washington Baum Bridge and Melvin R. Daniels Bridge connects the North Carolina mainland with the Outer Banks communities.
Contents
History
In 1996, after two hurricanes forced evacuation of the Outer Banks area during peak tourist season. The existing William B. Umstead Bridge, built in 1955, was unable to handle the high volume of traffic. To help alleviate traffic congestion and provide an additional emergency evacuation route from the Outer Banks, planning for the new bridge began in earnest. In January 1997, Wilbur Smith Associates was selected for the design of the bridge. In April 1998, Balfour Beatty Construction was awarded the prime construction contract.[4]
On August 16, 2002, the bridge was dedicated by NCDOT Secretary Lyndo Tippett and was opened that day.[3] The bridge initially carried US 64 Bypass and US 264 Bypass; but in September 2003, US 264 Bypass was removed.[5]
See also
References
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
External links
- Media related to Lua error in package.lua at line 80: module 'strict' not found. at Wikimedia Commons