South African Class 14 4-8-2
300px
No. 1707, as built, at Greyville Sheds, c. 1930
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The leading coupled axle had flangeless wheels |
The South African Railways Class 14 4-8-2 of 1913 was a steam locomotive.
Between 1913 and 1915, the South African Railways placed 45 Class 14 steam locomotives with a 4-8-2 Mountain type wheel arrangement in service in Natal.[1][2][3]
Contents
Manufacturer
The Class 14 locomotive was a development of the Class 12 and was similar enough to it that many components were interchangeable. It was ordered from Robert Stephenson and Company in 1913 and was delivered in three batches between 1913 and 1915, numbered in the range from 1701 to 1745.[1][2]
Characteristics
At the time the Class 14 was designed by D.A. Hendrie, Chief Mechanical Engineer (CME) of the South African Railways (SAR), it was believed that small differences in wheel diameter had disproportionate effects on performance. The SAR already had the Class 3B Mountain type with 45 inches (1,143 millimetres) coupled wheels and the Class 12 Mountain type with 51 inches (1,295 millimetres) coupled wheels, but for the 300 feet (91 metres) radius curves and 1 in 30 (3⅓%) compensated gradients of the Natal mainline, the Class 14 with 48 inches (1,219 millimetres) coupled wheels was designed as an intermediate-sized locomotive.[4]
Upon delivery, the locomotives could not be erected departmentally, owing to the congestion of work in the Durban workshops. The work was therefore contracted to Messrs. James Brown and Company of Congella.[1]
The Class 14 had Walschaerts valve gear and a Belpaire firebox and was superheated. It was delivered with Type MP1 tenders, which had a coal capacity of 10 long tons (10.2 tonnes) and a water capacity of Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value).. Apart from the differences in their coupled wheel diameters, the Class 14 was a better locomotive with a more modern cylinder design, having straighter ports and a larger steam chest volume than the other two classes.[2][4][5][6]
A feature in the design of the leading bogie was that the bogie frame was a single steel casting, to which the cast steel horns were bolted to take the axle boxes. An innovation was the arrangement of the laminated side control springs in combination with two point swing links, which would be part of all Hendrie's subsequent designs. To prevent trouble which had been experienced earlier, owing to the fracture of the smokebox saddle and frame stretcher castings which contained steam chest passages, and also leakage at exhaust joints, the blast pipe breeches were made separate castings and not integral with the centre stretcher casting.[1]
The engines were fitted with Pyle National turbo-generators and headlamps, with the generator attached to the top of the smokebox, ahead of the chimney. It had the Hasler speed indicator, sight feed lubricators, Hendrie's steam reversing gear, steam operation for rocking the firegrate, Gresham and Craven injectors, steam brakes and combination vacuum ejectors.[1]
Watson Standard boilers
During the 1930s, many serving locomotives were reboilered with a standard boiler type, designed by then CME A.G. Watson as part of his standardisation policy. Such Watson Standard reboilered locomotives were reclassified by adding an "R" suffix to their classification.[2][5][6]
From 1935, all the Class 14 locomotives were reboilered with Watson Standard no. 2 boilers and reclassified to Class 14R. Only slight modifications were found necessary to take the new boilers. In the process, the engines were also equipped with Watson cabs, with their distinctive slanted fronts, compared to the conventional vertical fronts of the original cabs. The flangeless leading coupled wheels were flanged and Type MR tenders were attached to the reboilered engines.[1][4][5][6]
Their original Belpaire boilers were fitted with Ramsbottom safety valves, while the Watson Standard boiler was fitted with Pop safety valves. An obvious difference between an original and a Watson Standard reboilered locomotive is usually a rectangular regulator cover, just to the rear of the chimney on the reboilered locomotive. In the case of the Class 14 locomotives, two even more obvious differences are the Watson cab and the absence of the Belpaire firebox hump between the cab and boiler on the reboilered locomotives.[5][6]
Service
South African Railways
The locomotives were placed in service on the mainline between Durban and Ladysmith in Natal. With the gradual further electrification of the Natal mainline in the 1920s, they were eventually left to operate on the old mainline route via Botha's Hill, until that line was also electrified. Most of them were then allocated to Empangeni in the north and Port Shepstone in the south. In 1976, many were transferred to the Witwatersrand for shunting service. By 1983, they were all withdrawn from service.[2][3]
International
As a result of the collapse of railways during the civil war in Mozambique in the late 1970s, Class 14R locomotives became the mainstay of locomotive power in Swaziland, until they were eventually replaced there by Class 15AR locomotives.[4]
Similarly, while Zimbabwe was rebuilding its Garratt fleet, Class 14R locomotives were hired for shunting service, to release Garratt locomotives for mainline work.[4]
Industry
Thirteen Class 14R locomotives were eventually sold into industrial service:
- No. 1701 became Apex Colliery no. 5 at Greenside.
- Numbers 1705 and 1737 respectively became Grootvlei Proprietary Mines no. 5 Joyce and no. 4. No. 4 was later renumbered to no. 6 Graham.
- Numbers 1711, 1714, 1719, 1732 and 1735 went to Rustenburg Platinum Mines, retaining their SAR numbers.
- Numbers 1723 and 1745 went to Natal Cambrian Colliery at Ballangeiech as no. 1 and 2 respectively.
- No. 1729 went to the Vaal Reefs Gold Mine.
- No. 1730 became Randfontein Estates Gold Mine no. 5.
- No. 1740 went to Newcastle Platberg Colliery and later to Ballangeiech Colliery.[4]
Illustration
The main picture and the builder's picture show the Class 14 with its original Belpaire firebox, while the remainder are all of locomotives with Watson Standard boilers and round-topped fireboxes.
-
Class 14 no. 1701.jpg
Builder's picture of no. 1701, c. 1913
-
SAR Class 14R 1701 Millsite 230479.jpg
No. 1701 with a modified Type MP1 tender at Millsite, 1979
-
SAR Class 14R 1730 Volksrust 120479.jpg
Second batch no. 1730 at Volksrust, 1979
-
SAR Class 14R 1745 Millsite 160481.jpg
Last built no. 1745 at Millsite, Krugersdorp, 1981
-
SAR 14R 1745-001.JPG
No. 1745, still staged at Millsite, 33 years later in 2014
References
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 Espitalier, T.J.; Day, W.A.J. (1945). The Locomotive in South Africa - A Brief History of Railway Development. Chapter VII - South African Railways (Continued). South African Railways and Harbours Magazine, July 1945. pp. 513-514.
- ↑ 2.0 2.1 2.2 2.3 2.4 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 4.0 4.1 4.2 4.3 4.4 4.5 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 5.0 5.1 5.2 5.3 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 43.
- ↑ 6.0 6.1 6.2 6.3 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 41, 43.
External links
External video | |
---|---|
![]() |
![]() |
Wikimedia Commons has media related to South African Class 14 (4-8-2). |
- Pages with broken file links
- Use dmy dates from November 2013
- Use South African English from November 2013
- All Wikipedia articles written in South African English
- Articles that mention track gauge 1067 mm
- Commons category link is locally defined
- Steam locomotives of South Africa
- 4-8-2 locomotives
- Robert Stephenson and Company locomotives
- D.A. Hendrie locomotives
- Watson Standard no. 2
- Cape gauge railway locomotives
- Railway locomotives introduced in 1913
- 1913 in South Africa